.png)
- Out-of-Stock
Tin LC60 0.25mm 250g
ID: 549276
Tin Sn60Pb40 with flux (250g spool, diameter 0.25mm, CYNEL
Description
Cynel tin with flux on a spool 250g, diameter 0.25mm.
S-Sn60Pb40 alloy produced in the first melt of tin and lead in accordance with the standard PN EN 29453: 2000, in a continuous process of casting without air access, then extruded, which eliminates the occurrence of oxides.
Chemical characterization
- Tin content: 59.5% to 60.5%
- Lead content: other
- Minimum purity of raw materials used: 99.90%
Maximum contamination:
| Cu | Ag | cd | sb | bi | fe | Zn | Al | ace | other |
|---|---|---|---|---|---|---|---|---|---|
| 0.05% | 0.01% | 0.002% | 0.05% | 0.05% | 0.02% | 0.001% | 0.001% | 0.03% | 0.08% |
Physical characteristics
- Melting point: 183 ° C to 190 ° C
- Specific weight: 8.65 g / cm3
- Working temperature: 320 ° C to 420 ° C
Application
Solder S-Sn60Pb40 is mainly used in the electronics industry, for the production of standard devices and electronic components, electrotechnics and for soldering elements with tin, tin-lead, cadmium, zinc and silver coatings.
549276
Data sheet
- Alloy
- Sn60Pb40
- Diameter
- 0,25 mm
- Weight
- 250 g
Manufacturer
- CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
- Białołęcka 231 B
- 03-253 Warszawa
- Poland
- [email protected]
Responsible person
- CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
- Białołęcka 231 B
- 03-253 Warszawa
- Poland
- formularz kontaktowy na stronie osoby odpowiedzialnej
You might also like
80W soldering station with a soldering stand and cleaning sponge. It has temperature control in the range of 100-420 °C and an analog temperature readout. Elwik RT-24 80W
zł398.99
Delivery date unknown
No product available!
80W soldering station with a soldering stand and cleaning sponge. It has temperature control in the range of 100~420 °C and a digital temperature readout. Elwik RTC-24 80W
zł647.96
24h
Available quantity: 1
Available
60W LES-1 soldering iron for Elwik RT-24 and Elwik RTC-24 stations. Elwik LES-1 60W
zł186.96
24h
Available quantity: 1
Available
60W soldering iron with tip temperature regulator placed in the handle. It has temperature control from 100°C to 400°C. Elwik LERT-24
zł213.75
24h
Available quantity: 1
Available
The device is designed for sliding a hot solder binder
zł20.49
Delivery date unknown
No product available!
Other products in the same category (16)
8 Mpx camera module with IMX219 sensor and wide-angle lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0194
Retired
No product available!
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
Retired
No product available!
The module with the OV5647 sensor, working with all versions of the Raspberry Pi. It uses a built-in movable IR-CUT filter that is turned on and off automatically depending on the lighting conditions. ArduCAM B003507
Retired
No product available!
Set of 4 mounting plates for Raspberry Pi 4B compatible with 19-inch 3U rack mount. The holder shown in the 3rd picture is not included in the set and must be purchased separately. ArduCAM U6131
Retired
No product available!
Camera module with IMX477 HQ sensor designed for Raspberry Pi Compute Module (CM3, CM3 +, CM4). Equipped with 1/2.3″ lens with M12 mount and 75° viewing angle. ArduCAM B0271
Retired
No product available!
Camera with a USB interface with a resolution of 8 MP. Equipped with a Sony CMOS IMX179 sensor and a wide-angle lens with a viewing angle of 105°. ArduCAM UB0229
Retired
No product available!
1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. ArduCAM B0225
Retired
No product available!
2 MPx camera module with OV2311 sensor working with Raspberry Pi. Equipped with a shutter and M12 lens mount. ArduCAM B0219
Retired
No product available!
The camera set with the IMX219 8 MPx sensor allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B8
Retired
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. ArduCAM B0199
Retired
No product available!
Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 75°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0188
Retired
No product available!
Module with 8 Mpx camera with IMX219 sensor and lens with 75° viewing angle. Designed for Nvidia Jetson Nano and Raspberry Pi Compute Module. ArduCAM B0187
Retired
No product available!
A set with two IMX219 cameras with a resolution of 8 MP and an expansion module for the Raspberry Pi, which allows you to connect two cameras simultaneously. ArduCAM B0350
Retired
No product available!
2 MPx camera module with OG02B10 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter, it is characterized by good sensitivity. Pivariety adapter included. ArduCAM B0348
Retired
No product available!
Camera module with IMX219 sensor with a resolution of 8 MP designed for NVIDIA Jetson Nano / Xavier and Raspberry Pi Compute Module. ArduCAM B0342
Retired
No product available!
2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M9 lens mount. Acrylic case included. ArduCAM B0220
Retired
No product available!
Tin Sn60Pb40 with flux (250g spool, diameter 0.25mm, CYNEL