![Main view Main view](https://kamami.pl/66027-large_default/gravity-aht20-temperature-and-humidity-module-with-a-temperature-and-humidity-sensor.jpg)
![Main view Main view](https://kamami.pl/66027-large_default/gravity-aht20-temperature-and-humidity-module-with-a-temperature-and-humidity-sensor.jpg)
zł19.59 tax excl.
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a Gravity connector, it communicates via the I2C interface. DFRobot SEN0528
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
A module with a temperature and humidity sensor based on the AHT20 system. It has an accuracy of ± 2% when measuring relative humidity from 20 to 80% and an accuracy of ± 0.3 ° C when measuring temperatures from 20 to 60 ° C. The module is compatible with 2V and 5V controllers, and communication is via the I2C interface (Gravity connector). Full documentation is available on the product page.
Data sheet
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
No product available!
Expansion board for Arduino, allows easy connection of XBee modules, has separate outputs for I2C, SPI and UART buses. The built-in 3.3V voltage stabilizer and operating mode switch make it easier to program the Arduino when the XBee module is connected to the sockets. DFRobot DFR0265
Gravity: The high temperature sensor is a sensor based on the PT100 probe and adapted to very high temperatures (30-350 ° C). The module is powered by 3.3 ... 5.5V voltage. DFRobot SEN0198
Module with digital temperature sensor AS6212. It enables measurement in the range from –40°C to 125°C with an accuracy of 0.2°C. SparkFun SEN-18521
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558
No product available!
Module with MLX90614 temperature sensor with a measurement accuracy of 0.2°C and a viewing angle of 5°. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020894
Module with DHT20 sensor. It allows you to measure humidity in the range from 0 to 100% and temperature from -40 to 80 ℃. Seeed Studio 101020932
Module with a temperature sensor designed for the M5Stack sets. It allows you to measure high temperatures. The set includes a K-type thermocouple probe. M5Stack U133
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
A set with a temperature sensor based on the DS18B20 system in the form of a waterproof measuring probe, a sensor adapter and a cable. Communication via the 1-Wire interface. DFRobot KIT0021
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. It communicates via the UART interface
The Pmod TMP3 is an ambient temperature sensor built around the Microchip TCN75A. Users may configure the output through I2C to up to 12 bits of resolution as well as setting a trigger to occur when a user defined temperature threshold is reached.. Digilent 410-287
No product available!
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
A module with a temperature and humidity sensor based on the AHT20 system. Equipped with a Gravity connector, it communicates via the I2C interface. DFRobot SEN0528