Module with SHT30 sensor for Wemos D1 Mini
ID: 1180543
5906623442911
zł16.25
Tax included
zł13.21 tax excl.
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini
Description
Module with digital temperature and humidity sensor SHT30 designed for Wemos D1 Mini tiles. It enables the measurement of humidity in the range of 0 to 100% and temperature in the range of -40 to 125 °C. It is characterized by high reliability and stability with low energy consumption, fast response and resistance to interference. The sensor is internally calibrated, communication via the I2C interface.
Features
- Humidity measuring range: 0% RH to 100% RH
- Humidity measuring accuracy: ± 3% RH @ 10% RH to 90% RH (at 25 ℃)
- Temperature measurement range: -40 ℃ to 125 ℃
- Temperature measurement accuracy: ± 0.3 °C at 0 °C to 65 °C
- Communication: I2C
Kit contains
- Module with SHT30 sensor
- Set of goldpin connectors
1180543
Data sheet
- Interface
- I2C
- Type of sensor
- SHT30
- Power supply voltage
- 3,3 V
- Sensor type
- Temperatury
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł18.24
24h
Available quantity: 40
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.77
24h
Available quantity: 10
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.70
24h
Available quantity: 24
Available
The power supply module with the LiPo battery charging circuit, designed for the Wemos D1 Mini boards
zł8.02
Delivery date unknown
No product available!
Module with DHT11 temperature and humidity sensor designed for Wemos D1 Mini
zł7.74
24h
Available quantity: 9
Available
Module with a temperature sensor DS18B20 designed for Wemos D1 Mini
zł9.85
24h
Available quantity: 1
Available
Other products in the same category (16)
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 382
Available
High temperature measuring kit. It consists of a signal conversion module with a range of -270°C to 1372°C and a K-type thermocouple probe with a range of up to 800°C. I2C communication DFRobot DFR0558
zł126.64
4 weeks
No product available!
Module with DS18B20 temperature sensor from Dallas Semiconductor. The sensor used allows you to measure temperatures in the range -55 ~ 125 ° C with an accuracy of ± 0.5 ° C (in the range of -10 ~ 85 ° C). The 1-Wire interface is used for communication. The plate is equipped with a goldpin connector and a KAMAMI connector, allowing easy connection of the module to the commissioning kits.
zł13.90
24h
Available quantity: 350
Available
Non-contact temperature sensor. Used to measure the infrared intensity of an object to calculate the surface temperature without a contact point in the range -70 ... 380 ° C. DFRobot SEN0256
zł415.47
24h
Available quantity: 1
Available
Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264
zł398.88
24h
Available quantity: 2
Available
Temperature sensor based on the DS18B20 system in a water proof measuring probe. Communication via the 1-Wire interface. DFRobot DFR0198
zł26.42
4 weeks
No product available!
A set with a temperature sensor based on the DS18B20 system in the form of a waterproof measuring probe, a sensor adapter and a cable. Communication via the 1-Wire interface. DFRobot KIT0021
zł26.14
24h
Available quantity: 2
Available
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a PCC connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16294
zł146.78
24h
Available quantity: 1
Available
Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295
zł147.93
24h
Available quantity: 1
Available
Module with digital temperature sensor TMP102. It enables temperature measurement in the range from –40°C to 125°C with an accuracy of 0.5°C. The system communicates via the I2C interface. SparkFun SEN-16304
zł32.75
24h
Available quantity: 1
Available
Module with digital temperature sensor TMP117. It enables temperature measurement in the range from –55°C to 150°C with very high accuracy up to ± 0.1°C. The system communicates via the I2C interface. SparkFun SEN-15805
zł78.23
24h
Available quantity: 2
Available
Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556
zł25.76
24h
Available quantity: 2
Available
Temperature sensor in the form of a HT-NTC100K thermistor on a 1 m cable. Designed for 3D printers
zł5.40
4 weeks
No product available!
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594
zł79.57
4 weeks
No product available!
The module with the MAX31850K amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via 1-Wire. Seeed Studio 101020555
zł82.45
24h
Available quantity: 2
Available
Module with SHT30 temperature and humidity sensor designed for Wemos D1 Mini