Module with DS18B20 temperature sensor for Wemos D1 Mini
ID: 1180542
5906623471430
zł9.85
Tax included
zł8.01 tax excl.
Module with a temperature sensor DS18B20 designed for Wemos D1 Mini
Description
Module with a temperature sensor designed for Wemos D1 Mini tiles. It is based on the DS18B20 sensor from Maxim and measures the temperature in the range -55 to 125 °C. Communication with the sensor takes place via a digital 1-wire interface. The sensor can return temperature as a 9-bit value or even as a 12-bit value. Each of the sensors has a unique 64-bit ID, which allows you to connect multiple systems in one line.
Features
- Temperature measurement range: -55 to 125 °C
- Measurement accuracy up to ± 0.5 °C
- 12-bit maximum resolution
- Interface: 1-wire
Kit contains
- Module with DS18B20 temperature sensor
- Set of goldpin connectors
1180542
Data sheet
- Interface
- 1-wire
- Type of sensor
- DS18B20
- Power supply voltage
- 3,3 V
- Sensor type
- Temperatury
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Development board D1 Mini with WiFi module ESP-8266MOD and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini
zł19.36
24h
Available quantity: 29
Available
Module with 0.66 "OLED display with 64x48 resolution for D1 Mini PCB with I2C interface. WeMos OLED Shield
zł12.87
24h
Available quantity: 6
Available
Development board D1 Mini V3 with WiFi module ESP-8266 and 4 MB Flash memory. The module can be programmed from the Arduino IDE level. WeMos D1 Mini V3.x
zł18.76
24h
Available quantity: 13
Available
The power supply module with the LiPo battery charging circuit, designed for the Wemos D1 Mini boards
zł8.24
24h
Available quantity: 2
Available
The module with an 8x8 LED matrix designed for Wemos D1 Mini
zł7.70
24h
Available quantity: 2
Available
Other products in the same category (16)
LHT52 Indoor LoRaWAN Sensor US915 – air temperature and humidity sensor for LoRaWAN, IP52 - Seeed...
LHT52 Indoor LoRaWAN Air Temperature and Humidity Sensor US915 Seeed Studio 101990984 is a wireless air temperature and humidity sensor designed for smart home systems, offices, and industrial applications. Thanks to battery power, data logging, and LoRaWAN compatibility, it is suitable for environmental monitoring, building automation, and precision agriculture.
zł149.83
4 weeks
No product available!
Module with temperature and humidity sensor DHT11. It uses a 1-wire communication interface and has a humidity measurement range from 20 to 90% with an accuracy of 5% and temperature from 0 to 50 ºC with an accuracy of 2 ºC
zł17.05
24h
Available quantity: 5
Available
Non-contact temperature sensor with a measuring range from -70 to 380°C. It uses infrared waves and has a current output. DFRobot SEN0264
zł401.02
24h
Available quantity: 1
Available
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. It communicates via the UART interface
zł158.99
24h
Available quantity: 1
Available
Module with MLX90615 temperature sensor with a measurement accuracy of 1°C and a resolution of 0.02°C. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020077
zł173.93
24h
Available quantity: 1
Available
The AHT15 is a precise and reliable temperature and humidity sensor, ideal for applications in harsh environmental conditions.
zł17.72
24h
Available quantity: 14
Available
The AHT25 is a versatile and precise humidity and temperature measurement module, ideal for consumer electronics and industrial applications.
zł10.57
4 weeks
No product available!
Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector
zł17.90
24h
Available quantity: 416
Available
Temperature and humidity sensor module based on the HTS221 chip. Equipped with a STEMMA QT connector, it communicates via an I2C or SPI interface. Adafruit 4535
zł57.90
24h
Available quantity: 3
Available
Module with MLX90614-DCI sensor for non-contact temperature measurement in the range from -70℃ to 270℃. I2C communication. DFRobot SEN0263
zł359.76
4 weeks
No product available!
A digital temperature and humidity sensor module based on the SHT41 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5776
zł31.08
24h
Available quantity: 11
Available
Module with DHT11 temperature and humidity sensor designed for Wemos D1 Mini
zł7.74
24h
Available quantity: 11
Available
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
zł357.75
24h
Available quantity: 1
Available
The Iduino SE052 module with a DHT11 sensor enables easy integration with microcontrollers for measuring temperature and humidity. Ideal for weather stations, data loggers, and home automation, it offers stable and long-term performance across a wide range of applications.
zł11.89
24h
Available quantity: 4
Available
LM35 analog temperature sensor module for Arduino. DFRobot DFR0023
zł17.93
4 weeks
No product available!
STEMMA QT SHT45 Precision Temperature & Humidity Sensor - SHT45 Temperature & Humidity Sensor Module
A digital temperature and humidity sensor module based on the SHT45 chip. It features a STEMMA QT/Qwiic connector and communicates via an I2C interface. Adafruit 5665
zł78.30
4 weeks
No product available!
Module with a temperature sensor DS18B20 designed for Wemos D1 Mini