Elecrow 10.1" ESP32-P4 Home Assistant Panel - No Camera

Description

Elecrow 10.1" Smart Home Control Panel for Home Assistant ESP32-P4 - Without Camera is designed as a fixed touchscreen interface for an existing Home Assistant system. Pre-installed software allows the panel to connect to a Home Assistant server and access configured dashboards, devices, scenes and automations. The panel can be used as a wall-mounted control point for lighting, climate control, energy monitoring, photovoltaic systems, EV charging and other building automation functions.

The ESP32-P4 platform uses a 32-bit dual-core RISC-V processor for the HP system running at up to 400MHz and an additional 32-bit RISC-V core for the LP system running at up to 40MHz. The platform provides 768KB L2MEM, 32KB SRAM, 8KB TCM, 32MB PSRAM and 16MB Flash memory. Support for ESP-IDF and Arduino IDE also allows custom applications and HMI interfaces to be developed.

The 10.1" IPS display provides a resolution of 1024 × 600px, typical brightness of 400cd/m², a 178° viewing angle and 16.7 million colors. The capacitive touchscreen supports single-touch and up to 5 simultaneous touch points. The large display area allows Home Assistant dashboards with cards, charts, switches and device status information to be operated conveniently.

Wireless connectivity includes 2.4GHz Wi-Fi with Wi-Fi 6 support and Bluetooth 5.3 with BLE. The panel also provides USB 2.0, UART, I2C, GPIO, an SD card holder, battery connector, speaker connector, camera header and expansion module headers. Optional modules can extend the platform with Zigbee, LoRa, nRF24, Matter, Thread or Wi-Fi HaLow.

The audio subsystem includes an amplifier, microphones and dual speakers, while the power circuitry provides battery charging management. The panel requires a 5V / 2A power supply via USB or the appropriate power terminal. M3 mounting holes with a diameter of 3.2mm are positioned around the board to simplify integration into a wall panel or custom enclosure. Version DHE01101C is supplied without a camera and without an enclosure. Home Assistant must run on a separate server because the panel acts as a user interface and does not replace the Home Assistant server.

Features

Processor and memory

• Manufacturer: Elecrow
• Product code: DHE01101C
• Main chip: ESP32-P4NRW32
• HP processor: 32-bit dual-core RISC-V, up to 400MHz
• LP processor: 32-bit single-core RISC-V, up to 40MHz
• HP L2MEM: 768KB
• LP SRAM: 32KB
• TCM: 8KB
• PSRAM: 32MB
• HP ROM: 128KB
• LP ROM: 16KB
• Flash memory: 16MB
• Development environments: ESP-IDF, Arduino IDE
• Firmware: pre-installed Home Assistant software

Display

• Screen size: 10.1"
• Panel type: IPS
• Resolution: 1024 × 600px
• Touch panel: capacitive
• Touch support: single-touch / 5-point
• Viewing angle: 178°
• Typical brightness: 400cd/m²
• Number of colors: 16.7 million
• Color depth: 8 bits per channel

Wireless connectivity

• Wi-Fi: 2.4GHz, Wi-Fi 6, IEEE 802.11 b/g/n
• Bluetooth: 5.3
• Bluetooth Low Energy: supported
• Optional expansion: Zigbee, LoRa, nRF24, Matter, Thread, Wi-Fi HaLow

Interfaces and functions

• USB 2.0
• UART
• I2C
• GPIO
• SD card holder
• Battery connector
• Speaker connector
• Camera header
• Expansion module headers
• Audio amplifier
• Microphones
• Dual speakers
• Battery charging management
• USB-to-UART converter
• Reset button
• Boot button
• Power button
• PWR indicator
• CHG indicator

Electrical and mechanical parameters

• Power input: 5V / 2A
• Power input via USB or power terminal
• Panel dimensions: 248 × 147mm
• Mounting holes: M3, 3.2mm
• Operating temperature: -20–70°C
• Storage temperature: -30–80°C
• Version: without camera
• Enclosure: not included