• New
Main view
search
  • Main view
ID: 1199104
5902560998641
zł199.00
Tax included

zł161.79 tax excl.

Flexible Fiberlogy FiberFlex 40D S2 TPU filament in SkinTone 3 color, with a 1.75mm diameter and 0.85kg net weight. The Shore 40D material provides 700% elongation at break, 28MPa tensile strength at break and a 70°C heat deflection temperature at 0.45MPa. Fiberlogy FiberFlex 40D S2

24h
Available
Available quantity: 1

Description

Fiberlogy FiberFlex 40D S2 SkinTone 3 1.75mm 0.85kg filament is intended for printing parts that require a combination of flexibility, mechanical resistance and the ability to undergo significant deformation without cracking. Its Shore 40D hardness makes the material suitable for gaskets, washers, shock-absorbing components, protective parts, grips and other elements exposed to bending, compression and stretching.

The material provides 700% elongation at break according to ASTM D638, while tensile strength at break is 28MPa. Flexural modulus is 67MPa. FiberFlex 40D maintains high impact resistance at low temperatures and also provides resistance to abrasion and chemicals, making it suitable for both prototypes and functional printed parts.

The recommended printing temperature is 200–220°C, with a bed temperature of 70°C. Maximum recommended printing speed is below 45mm/s, while the cooling fan should be set to 50–75%. An enclosed chamber is not required.

Example print made with Fiberlogy FiberFlex 40D filament

Depending on the build surface, Fiberlogy recommends masking tape or adhesive for smooth PEI and glass, while adhesive is recommended for textured PEI. If the filament has absorbed moisture, it should be dried for 4 hours at 60°C before printing.

Features

  • Brand: Fiberlogy
  • Series: FiberFlex 40D
  • Variant: S2
  • Color: SkinTone 3
  • Material type: TPU
  • Hardness: Shore 40D
  • Filament diameter: 1.75mm
  • Net weight: 0.85kg
  • Printing temperature: 200–220°C
  • Bed temperature: 70°C
  • Maximum recommended print speed: <45mm/s
  • Cooling fan: 50–75%
  • Enclosed chamber: not required
  • Drying conditions: 60°C / 4h
  • Density: 1.16g/cm³
  • Heat deflection temperature at 0.45MPa: 70°C (ASTM D648)
  • Tensile strength at break: 28MPa (ASTM D638)
  • Flexural modulus: 67MPa (ISO 178)
  • Elongation at break: 700% (ASTM D638)
  • Smooth PEI: masking tape or adhesive
  • Textured PEI: adhesive
  • Glass: masking tape or adhesive
1199104

Data sheet

Rodzaj filamentu
TPU
Ilość filamentu
0,85 kg
Diameter
1,75 mm
Colour
jasnobrązowy
Type of packaging
Spool

Manufacturer

Responsible person

You might also like

Other products in the same category (16)