WEP 968DA + 2in1 soldering station - hot air and tip soldering iron
ID: 578807
5906623435586
zł482.65
Tax included
zł392.40 tax excl.
The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station's operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+
Description
The WEP 968DA + 2 in 1 soldering station has hot air and a soldering iron. It has large LED displays significantly facilitating operation, a powerful and stable SAMSUNG microprocessor controlling the operation of the device and a soldering tip soldering power 70 W with extraction of vapors from under the tip. The temperature correction function depends on the operating environment, heating element efficiency, blowing power and tip wear. The big advantage is the air flow up to 28 L / min, the source is the compressor.
The station has a function check function, we receive messages about a short circuit, circuit overload, failure to achieve the set temperature. All these errors are shown on the display.
Features
- Power consumption: 720 W
- Temperature range of the tip flask: 200 - 480°C
- Hotair flask temperature range: 100 - 480°C
- Power of the tip soldering iron: 70 W
- Air supply source: compressor
- Air flow: up to 28 L/min
- Display type: LED
- Temperature stability: ±1°C
- Arrowhead ground voltage: <2 mV
- Ground wire resistance: <2 ohm
Included:
- WEP 968DA + soldering station with hot air soldering iron
- Hot air flask holder
- 908A tip flask with fume extraction
- Stand for the stock tip with tip cleaning sponge and tin holder
- Set of 5 reduction nozzles:
- Round nozzle with a diameter of 2.5 mm 1124
- Round nozzle with a diameter of 4.4 mm 1130
- Round nozzle with a diameter of 7 mm 1196
- Round nozzle with a diameter of 9 mm 1197
- Square nozzle 12 x 12 mm 1313
- Power cable
- Spare filter for fume extraction
- Gripper for lifting systems
- User manual
578807
Data sheet
- Station type
- 2in1 (tip soldering iron + hotair)
- Tip soldering iron temperature
- 200 - 480 °C
- HotAir temperature
- 100 - 480 °C
- Power
- 70 W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł4.31
24h
Available quantity: 31
Available
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.65
24h
Available quantity: 39
Available
Brass chip cleaner, in a metal stand, for cleaning soldering tips from tin residue
zł12.61
Delivery date unknown
No product available!
This 35 x 50 mm wet tip cleaning sponge is designed for routine soldering tip maintenance. It effectively removes solder residue and contaminants during work. It\'s ideal for use in electronics workshops, repair shops, and during electronics assembly and prototyping
zł2.08
24h
Available quantity: 93
Available
Other products in the same category (16)
Soldering station 5 in 1: hotair (100-480 deg. C), soldering tip 60W, service power supply 0-15V / 1A, RF signal tester and voltage meter. Included, among others set of nozzles and gripper for integrated circuits
zł509.58
24h
Available quantity: 1
Available
Soldering station 2 in 1: hotair 100..480 st. C, soldering iron 75W 200..480 st. C. The station has a built-in PID control, settings are displayed on the LCD display
zł742.90
1 weeks
No product available!
Soldering station with a ceramic heating element with a capacity of 45W, temperature 200.40 ° C
zł112.00
24h
Available quantity: 1
Available
WEP 937D + soldering station with smoothly adjustable temperature in the range from 200 ° C to 480 ° C, temperature sensor and LED display. WEP 937D +
zł175.78
24h
Available quantity: 1
Available
soldering iron WEP 992DA + is a hot air soldering station and a soldering iron. It is equipped with a PID microprocessor, used for soldering and desoldering electronic components, shrinking, welding plastics, heating. WEP 992DA + 3in1
zł1,159.73
24h
Available quantity: 2
Available
75W soldering station, temperature 200..480 degrees C.
zł173.84
1 weeks
No product available!
WEP 938D + double soldering iron with a special flask stand, temperature range 100-480C, LCD display.
zł460.78
24h
Available quantity: 2
Available
Soldering station with a soldering iron and thermocouple. Device equipped with memory of 3 settings / profiles. The device facilitates disassembly of SMD and DIL elements
zł461.25
1 weeks
No product available!
Hotair 100..480 st. C soldering station with 75W flask soldering iron. Memory of three settings / profiles. Settings are displayed on the LCD display
zł742.98
24h
Available quantity: 1
Available
Station with two separate panels for a 75W (200-480 deg. C) soldering gun and hotair (100-480 deg. C).
zł381.95
24h
Available quantity: 1
Available
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
zł808.29
24h
Available quantity: 1
Available
Soldering iron with smooth regulation of digitally controlled air discharge, with temperature regulation in the range of 100 ° C to 500 ° C
zł214.89
24h
Available quantity: 1
Available
Repro 936A station with a strong heater operating in the temperature ranges of 200-480 o C, power 50-100W. It has ESD SAFE protection
zł105.88
24h
Available quantity: 4
Available
Yihua 937D+ soldering station with 75 W rated power and up to 120 W peak power, featuring temperature control from 200-480°C, LED display, and ESD Safe protection. Equipped with 907E soldering iron with ceramic heater and compatible with 900M-T tips. Yihua 937D+
zł139.90
24h
Available quantity: 4
Available
No product available!
YIHUA 938BD soldering station + thermocouple + 2 in 1 flask
zł431.61
24h
Available quantity: 1
Available
The WEP 968DA + soldering station is a hot air station and a soldering iron with LED display. It is equipped with a SAMSUNG microprocessor that checks the station's operating parameters and corrects them to the set values. The station is suitable for soldering and desoldering electronic components such as SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 968DA+