

Yihua 872D is a 2in1 soldering station connecting hot air soldering iron and soldering iron. The station is equipped with an advanced PID controller that allows to obtain a stable temperature even when soldering large components with a soldering iron. The station has a strong heating element that guarantees quick heating and durability of the heater. It has a clear LCD display showing the current temperature of soldering irons and blowing power. The temperature and blowing power can be set using potentiometers. The soldering iron is equipped with an automatic heater cooling function when the soldering iron is not used, in the case of a hot air soldering iron the switch is located in the holder, so after putting the soldering iron the automatic cooling takes place, in the case of a soldering iron you can set the time after which the soldering iron cools down to 200ºC, which significantly extends the life of the heater.
The wide range of available tips allows you to solder not only through-hole elements, but also SMD in housings such as QFP, SOIC or PLCC, while the hot air soldering iron compatible with many nozzles will be perfect for soldering elements in more demanding housings such as BGA.
Hot air
Tip soldering iron
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
Rosin for soldering with addition of activators, thanks to which this rosin has activity similar to solder paste. The packaging contains 40g of flux. AG Termopasty ART.AGT-034
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
The sponge is indispensable at the time of soldering, it removes tin residues and stains from the tip. Dimensions 55x55mm
Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 1.5mm wide and 1.5m long.
Thickened rosin flux intended for SMT assembly and repair. In a 10 ml cartridge. AG Termopasty ART.AGT-179
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.
Soldering station 2 in 1 for hot air and arrowhead. With original Japanese heating elements Hakko and PID controller correcting the temperature on an ongoing basis.
The WEP 898DB soldering station is a small and functional tool designed for professional work. It has a hot air and tip soldering iron, has the ability to adjust the temperature and air blast power and two LED displays showing the temperature for both soldering irons. WEP 898DB
No product available!
WEP 938D + double soldering iron with a special flask stand, temperature range 100-480C, LCD display.
YIHUA 938BD soldering station + thermocouple + 2 in 1 flask
No product available!
Soldering station with a soldering iron and thermocouple. Device equipped with memory of 3 settings / profiles. The device facilitates disassembly of SMD and DIL elements
No product available!
2-in-1 soldering station with a power of 700 W with a hot air soldering iron and a tip soldering iron. Equipped with an LCD display, controlled by potentiometers. WEP 706
937D digital soldering station + 50-100 W power
No product available!
75W soldering station, temperature 200..480 degrees C.
No product available!
The WEP 852D + SE soldering station is a hot air station for soldering of electronic systems, e.g. BGA, SMD, etc., and a 75W tip soldering station. Both station modules can work independently of each other. The wide application and minimal failure rate of the device gives it a leading position on the market of soldering stations. WEP 852D+SE
No product available!
WEP 938 soldering station is a powerful soldering iron that quickly reaches the set temperature and quickly compensates for heat loss during operation. Thanks to this, you can solder at a lower temperature compared to cheaper soldering irons with slow temperature compensation. The station has the functions: temperature memory, sleep function, automatic shutdown. WEP 938
No product available!
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
Soldering station with soldering iron, LED lamp and magnifying glass. Station power 130 W. YIHUA 926
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
No product available!
WEP 937D + soldering station with smoothly adjustable temperature in the range from 200 ° C to 480 ° C, temperature sensor and LED display. WEP 937D +
No product available!
The WEP 937D soldering tip station has smooth temperature control in the range from 200 ° C to 480 ° C. Thanks to the built-in temperature sensor in the heater and LED display, you can set the desired temperature very precisely. WEP 937D
2in1 soldering station with hot air soldering iron and soldering tip. 700 W power station. Equipped with an LCD display, controlled by potentiometers. YIHUA 872D