TB-7Z-020-EMC
ID: 204678
zł9,505.61
Tax included
zł7,728.14 tax excl.
Xilinx Zynq-7000 AP SoC Extension Card By Inrevium™
TB-7Z-020-EMC
Xilinx Zynq-7000 All Programmable SoC Extension Card By Inrevium™, RoHS
The TB-7Z-020-EMC is an evaluation platform fitted with both an ARM® Cortex™-A9 MPcore with on-chip connection to an FPGA fabric and a Zynq-7000 All Programmable SoC that incorporates a range of peripheral functions. It can be used to implement evaluation systems into various different development projects.
Large logic development projects typically require hardware and software engineers to share the limited number of evaluation systems. In particular, development inefficiencies arise such as the long time simulation and lack of seamless emulation, if software engineers are unable to use their evaluation system frequently.
When used in conjunction with TEDs TB-7V-2000T-LSI ASIC development test platform or FPGA evaluation platforms fitted with an FMC connector, the TB-7Z-020-EMC facilitates task separation between hardware and software engineers, helps budget cut and reduce the development time significantly. The new TB-7Z-020-EMC features ease of connection to the main FPGA evaluation platform, and software engineers can use it to test the performance repeatedly on the real hardware during the development process. This provides a system-level evaluation environment that can be used with greater efficiency than was possible in the past.
By featuring small size and a wide range of interfaces, TB-7Z-020-EMC goes far beyond just connection ability with FPGA evaluation platform. The card can also demonstrate its high level performance and design productivity not only as the development environment, but also for the development of the application which require powerful ARM processor to differentiate your products from competitors. With supporting FMC connector, additional interfaces can be added easily to support the targeted application. This means that the TB-7Z-020-EMC can facilitate innovative product developments, and also can satisfy the diverse needs of developments to differentiate their products from competitors. Software reference designs are also available, including design for connection to various types of FPGA evaluation boards, for DVI interface and for Linux-based embedded systems.
Code: C/N: GEMINI
Xilinx Zynq-7000 All Programmable SoC Extension Card By Inrevium™, RoHS
The TB-7Z-020-EMC is an evaluation platform fitted with both an ARM® Cortex™-A9 MPcore with on-chip connection to an FPGA fabric and a Zynq-7000 All Programmable SoC that incorporates a range of peripheral functions. It can be used to implement evaluation systems into various different development projects.
Large logic development projects typically require hardware and software engineers to share the limited number of evaluation systems. In particular, development inefficiencies arise such as the long time simulation and lack of seamless emulation, if software engineers are unable to use their evaluation system frequently.
When used in conjunction with TEDs TB-7V-2000T-LSI ASIC development test platform or FPGA evaluation platforms fitted with an FMC connector, the TB-7Z-020-EMC facilitates task separation between hardware and software engineers, helps budget cut and reduce the development time significantly. The new TB-7Z-020-EMC features ease of connection to the main FPGA evaluation platform, and software engineers can use it to test the performance repeatedly on the real hardware during the development process. This provides a system-level evaluation environment that can be used with greater efficiency than was possible in the past.
By featuring small size and a wide range of interfaces, TB-7Z-020-EMC goes far beyond just connection ability with FPGA evaluation platform. The card can also demonstrate its high level performance and design productivity not only as the development environment, but also for the development of the application which require powerful ARM processor to differentiate your products from competitors. With supporting FMC connector, additional interfaces can be added easily to support the targeted application. This means that the TB-7Z-020-EMC can facilitate innovative product developments, and also can satisfy the diverse needs of developments to differentiate their products from competitors. Software reference designs are also available, including design for connection to various types of FPGA evaluation boards, for DVI interface and for Linux-based embedded systems.
Key Features:
- Device
- XC7Z020-CLG484
- Memory
- DDR3 SDRAM x 2 (16-bit data bus x 2)
- MicroSD card socket and media x 1
- 128 Mbit QSPI flash memory x 1
- Expansion Interface
- FMC (LPC) x 2
- Samtec ASP-134604-01 (Mezzanine)
- Samtec ASP-134603-01 (Carrier)
- Pmod (Digilent module interface) x 1
- Standard Interface
- Gigabit Ethernet x 1
- USB2.0 x 1
- UART (RS-232C) x 1
- CAN x 1
- DVI TX x 1
- Debug Interface
- JTAG x 2
- MICTOR-38 for ARM
- 10-pin header for Xilinx Cable
- LED
- DIP SW
- Push SW
- Clock
- Multi-clock generator
- ARM 33.33MHz
- Logic 148.5MHz
- Documentation
- Hardware Users Manual
- Reference Design Guides
- Schematics
- Reference Design (Verilog HDL)
- Reference design for connection to FPGA evaluation board
- Reference design using DVI output
- Linux boot reference design
Download:
Code: C/N: GEMINI
204678
Other products in the same category (16)
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-023
zł6,937.08
3 weeks
No product available!
FPGA development board with Xilinx Spartan 6 chip. Equipped with PCIe interface and two 1Gb DDR3 SDRAM memories. Numato Lab FPGAPCIE0001C
zł4,129.66
3 weeks
No product available!
Development kit with Xilinx Spartan 6 FPGA. Equipped with display, buttons, audio and video outputs and microSD slot. Numato Lab FPGA006
zł399.00
24h
Available quantity: 3
Available
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-10 (410-370-1)
zł2,175.80
24h
Available quantity: 2
Available
Module with Xilinx Kintex-7 XC7K325T-2CF system, 32MB FLASH memory and very fast data transmission systems. Everything is on a small 4 x 5 cm plate. TE0741-03-325-2CF
zł3,628.94
4 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity, 1 GB RAM memory and 10/100 Mbit Ethernet controller. Everything fits on a small 4 x 5 cm tile. TE0712-01-100-2C
zł1,488.67
4 weeks
No product available!
Basys3 is an entry-level FPGA board designed exclusively for the Vivado Design Suite, featuring Xilinx Artix 7-FPGA architecture. 410-183
zł744.14
24h
Available quantity: 3
Available
Module with Xilinx Artix-7 100T system and 32MB FLASH memory. TE0725LP-01-100-2L
zł1,237.91
4 weeks
No product available!
Image processing kit on the ZedBoard development board. The kit includes a Zedboard board, an adapter and four Pcam cameras. Digilent 471-034-1
zł4,881.86
3 weeks
No product available!
No product available!
A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)
zł843.67
24h
Available quantity: 2
Available
The Nexys Video features several components that make it ideal for developing audio/video applications. The Artix-7 XC7A200T FPGA is the most powerful chip from Xilinx\'s Artix-7 family. A Mini DisplayPort source provides the board with a uni-directional, high-bandwidth, low-latency audio/video channel. (410-316)
zł4,097.40
3 weeks
No product available!
Module with Xilinx Artix-7 100T system, FLASH memory with 32 MB capacity. Everything fits on a small 4 x 5 cm tile. TE0711-01-100-2C
zł1,015.12
4 weeks
No product available!
Module with Xilinx Artix 7 35T system, two 100 MBit Ethernet circuits, 512 MB RAM memory, 32 MB flash memory and built-in voltage converters. TE0710-02-35-2CF
zł956.66
4 weeks
No product available!
Module with Xilinx Artix-7, USB 3.0 / FIFO bridge, 1GB DDR3L SDRAM memory, 32 MB flash memory and pulse converters to ensure all voltages in the system. Everything fits on a small 4 x 5 cm tile. TE0713-01-200-2C
zł2,372.72
4 weeks
No product available!
Development kit with Artix-7 100T FPGA chip equipped with 512 MB DDR3 memory, Zmod port and Pmod ports and two-channel Zmod AWG 1411 DAC converter. Digilent 471-046
zł2,645.48
3 weeks
No product available!
Xilinx Zynq-7000 AP SoC Extension Card By Inrevium™