Seeeduino XIAO - development kit with SAMD21 ARM Cortex M0+ microcontroller (pre-soldered)
ID: 583060
zł41.91
Tax included
zł34.07 tax excl.
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
A small development kit with a SAMD21 ARM Cortex M0+ microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD.
The module can be powered by a USB type C connector (the connector is also used for programming the system) or by pins 5 V or 3.3 V. The microcontroller works with a voltage of 3.3 V, and connecting signals with a higher voltage may damage the system. The kit is compatible with Arduino and can be programmed using the Arduino IDE. Full documentation of the module with examples of use is available on the product page.
Features
- SAMD21G18 ARM Cortex-M0+ microcontroller operating at a frequency of up to 48 MHz
- Flash memory 256KB
- SRAM 32 KB
- Digital I / O pins 11
- Analog I / O pins 11
- I2C interface
- SPI interface
- UART interface
- Power and programming interface: USB Type-C
- LEDs: 1 user LED, 1 power LED, two serial data LEDs
- Reset button
- Power Pads for battery operation
- Compatible with the Arduino IDE
- Power supply 3.3 V/5 V DC
- Dimensions 20 × 17.5 × 3.5 mm
Kit contains
- Seeeduino Xiao module with connectors
- 4 x Sticker
583060
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.09
24h
Available quantity: 6576
Available
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Regular pricezł29.90zł27.90
24h
Available quantity: 89
Available
Expansion module for Seeeduino XIAO. It is equipped with an OLED display, RTC, MiniSD slot, buzzer, buttons, servo connector and numerous interfaces. Seeed Studio 103030356
zł81.45
24h
Available quantity: 10
Available
Expansion module for Seeeduino XIAO. It is equipped with Grove connectors and a lithium battery charging system. Seeed Studio 103020312
zł23.42
24h
Available quantity: 9
Available
RGB LED driver module designed for QT Py and Xiao boards. It uses a 3.3V/5V voltage level converter and allows to control 30 Neopixel LEDs. Adafruit 5645
zł23.30
24h
Available quantity: 9
Available
RGB 5x5 (25 LEDs) matrix LED display module designed for QT Py and Xiao boards. It uses SK6805 addressable LEDs and communicates via a single-wire interface. Adafruit 5646
zł58.66
24h
Available quantity: 2
Available
Miniature module with MicroSD card slot dedicated to QT Py and Xiao boards. Adafruit 5683
zł16.90
24h
Available quantity: 4
Available
Other products in the same category (16)
Development board with SAMD21 microcontroller (ARM Cortex® M0+), 22 I/O lines, 12 PWM channels, micro-USB. The module has a built-in SD connector with dedicated SPI (SPI1) interfaces that allow you to play music files. Arduino MKR Zero ABX00012
zł159.00
3 weeks
No product available!
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic. 256K FLASH, 32K RAM, built in USB and battery charging. Adafruit 2772
zł116.17
24h
Available quantity: 4
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3505
zł147.12
24h
Available quantity: 1
Available
Development kit with ATSAMD21G18 microcontroller and USB connector. It provides two Qwiic connectors and a programmable WS2812 LED. Perfect solution for people who want to quickly and easily connect a Qwiic device to a computer. SparkFun SPX-24639
zł149.00
24h
Available quantity: 1
Available
The board is equipped with the ATSAMD51J19 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins, connector for connecting the battery with the charging circuit. Adafruit 3857
zł150.66
24h
Available quantity: 1
Available
Educational kit for learning TinyML. It consists of the Wio Terminal module, Grove sensors and the course. Seeed Studio 114992774
zł382.46
24h
Available quantity: 1
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core. It has connectors and dimensions compatible with the Arduino Uno Rev3. HW-819
zł89.45
24h
Available quantity: 2
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3857
zł89.36
24h
Available quantity: 1
Available
The Wio Helium Monitor is a plug-and-play LongFi hotspot monitor for the Helium network. It allows you to determine whether a device is connected to the local area network (LAN) and whether it has access to the Internet. With Grove-Wio-E5 and an activated Watchium Silver/Gold subscription, you can also check that LoRaWAN communication with the hotspot (including Witness) is working correctly. Seeed Studio 114992990
zł368.42
24h
Available quantity: 2
Available
Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500 is a development board with a 32-bit ATSAMD21G18 microcontroller based on Cortex-M0 core. The board also has an ATWINC1500 module that provides WiFi connectivity. Adafruit 3010
zł261.29
24h
Available quantity: 1
Available
The board is equipped with ATSAMD51 microcontroller with ARM Cortex-M4 core and SPI Flash memory, communication interfaces and RGB diode. Adafruit 3382
zł170.13
24h
Available quantity: 2
Available
Development kit with ATSAMD21E microcontroller with ARM Cortex M0+ core. The chip can be clocked at 48 MHz, has a built-in 256 KB of Flash memory and 32 KB of SRAM. The module has a Qwiic connector. SparkFun DEV-15423
zł110.56
24h
Available quantity: 1
Available
A small development kit with a SAMD21 ARM Cortex M0 + microcontroller. There are 14 GPIO connectors on the board, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010328
Regular pricezł29.90zł27.90
24h
Available quantity: 89
Available
Board with SAMD21 microcontroller with Cortex M0+ core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Arduino ABX00027
zł129.00
24h
Available quantity: 18
Available
The board is equipped with ATSAMD21 microcontroller with ARM Cortex-M0 core and SPI Flash memory, GPIO pins and RGB diode. Adafruit 3727
zł66.67
24h
Available quantity: 1
Available
Board with SAMD21 microcontroller with CortexM0 + core (48 MHz, 256 KB Flash, 32 KB RAM). Equipped with WiFi and BT module (based on ESP32) and IMU LSM6DS3 unit. Ideal for applications in the IoT area. Module with headers. Arduino ABX00032
zł139.00
24h
Available quantity: 17
Available
Development kit with ATSAMD21G18A microcontroller. It has 14 GPIO connectors, including 11 digital and analog pins, 10 PWM, DAC, I2C, UART, SPI, SWD. Compatible with Arduino. Seeed Studio 102010388