Category: RETIRED PRODUCTS

A set for building an electronic laboratory based on a TotemDuino board. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-MCL1

Side panel with I/O elements for Totem Mini Lab and Totem Micro Lab sets. There are buttons, potentiometers, LED diodes and a relay on the board. Totem TE-SP01-B

Side panel with sensors for Totem Mini Lab and Totem Micro Lab sets. The board has a microphone, OLED display, DH11 humidity sensor, NTC thermistor, buzzer and a DC motor control module. Totem TE-SP02-B

Side panel with audio elements for Totem Mini Lab and Totem Micro Lab sets. The board has an audio amplifier with a loudspeaker, a VU indicator, a function generator and a pi filter circuit. Totem TE-SP03-B

A set for the construction of two fighting robots (green and yellow) controlled by a mobile application for a smartphone or tablet. Totem TRK-MT2

Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Blue

A kit for building a four-wheeled platform controlled by a mobile application. TMK-4WDU totem

A set for building a mobile robot with a gripper controlled by a mobile application. TMK-DMNNG totem

Kit for building a dog robot controlled by a wire with a switch. Totem TKR-DG

Kit for building a giraffe robot controlled by a wire with a switch. Totem TKR-GRF

Kit for building a dinosaur robot controlled by a wire with a switch. Totem TKR-TRX

A set for building a walking robot controlled by a mobile application. Totem TKR-LSP

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and output on pads. It enables powering devices with 9 V or 12 V and testing chargers. PDC005

Kit for building an electronic laboratory based on the TotemDuino board and the LabBoard extension module. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-ML1

An expansion board (HAT) with a Sipeed module designed to run artificial intelligence (AIoT) in cooperation with a Raspberry Pi. Seeed Studio 102991187

Robot controller dedicated to Totem sets. It is based on the ESP32 chip (WiFi and Bluetooth module), equipped with a DC motor and servo driver, RGB diodes and an IMU sensor. Totem TE-X4-KIT1

Male terminal block, straight, 8-pin. 3.5 mm pitch. Height 9.2 mm. GOLTEN 15EGTVC-3.5-08P-14-00AH

Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico

Development board with ESP32 module (WiFi + Bluetooth) in the set with the OV2640 camera. Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One Kit

AI accelerator with a USB connector based on the Intel Movidius Myriad X Vision Processing Unit 4GB. It can work with Ubuntu 16.04, Windows 10, Rasbian and others. in use with OpenVINO. Intel NCSM2485.DK