Category: RETIRED PRODUCTS

Set with 5 MP camera and 2 DOF control platform designed for Raspberry Pi minicomputers. The camera is equipped with an OV5647 sensor, equipped with an integrated IR filter. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0033PT

Camera module with USB interface with 2MP resolution. Camera with Sony CMOS IMX323 sensor, the module is equipped with two microphones. ArduCAM UB0212

USB camera module with 8 MP resolution based on Sony IMX179 1/3.2" matrix compatible with UVC. It has variable focal length adjustable from 5 to 50 mm. Equipped with a lens with CS mount with integrated UV filter. ArduCAM UB0213

A small tripod with 1/4" mounting screw for the Raspberry Pi HQ Camera. It has the ability to adjust the height with a rotary head. ArduCAM UB0217

Nikon F-Mount lens mount adapter for C-Mount Raspberry Pi HQ. ArduCAM UB0218

Multifunctional lens calibration kit for M12, CS-Mount, C-Mount and DSLR lenses. It allows focus calibration, FoV measurement without the need for additional calculations and focusing. ArduCAM B0226

M12 mount lens included with adapter. Focal length 6 mm and FoV 70°. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN023

Starter kit with the Kinetis K32 L2B microcontroller, integrated with the OpenSDA programmer-debugger, LCD display, accelerometer and MEMS magnetometer and USB connector. Conclusions compatible with Arduino. NXP FRDM-K32L2B3

Ultra wide angle lens with M12 mount included with the adapter. 2.8 mm focal length and 130° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN032

C-Mount lens. Focal length 5 mm, FoV 60.3° (H), 47.1° (V) manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN042

Quad-band GSM/GPRS module operating at 850/900/1800/1900MHz frequencies. It has integrated TCP/IP, UDP, FTP, PPP network protocols. Quectel M95FA

Module with 9-axis IMU BMX160 sensor (accelerometer, gyroscope and magnetomet) and BMP388 pressure/temperature sensor. Communication via the I2C interface. DFRobot SEN0252

Vision Edge computing platform with ARM Cortex-A53 1.2 GHz 64-bit quad-core processor, ARM Cortex-R5 600 MHz dual-core processor, embedded Mali400 graphics processor and FPGA chip. MYIR VECP Starter Kit

The minicomputer with the Intel Celeron J4115 quad-core processor (2.5 GHz, 64-bit) has 2 slots for DDR4 RAM modules. Additionally, it is equipped with, among others: Gigabit Ethernet, HDMI 2.0 port and Display Port 1.2 4K/60Hz, four USB sockets, 24 GPIO, PCI-e slot, two SATA3 connectors. Rev-B+. ODROID H2+

LPCXpresso55S16 evaluation kit with LPC55S16 microcontroller with ARM Cortex-M33 core. The board contains built-in LPC-Link2, audio subsystem, accelerometer, USB interfaces and Arduino connectors. NXP LPC55S16-EVK

The MIMXRT1062DVL6A Processor Evaluation Kit, which runs up to 600 MHz, has 256 MB of SDRAM, 512 MB of Flash and 64 QSPI Flash. NXP MIMXRT1060-EVK

Double relay controlled by Wi-Fi with the function of roller shutter controller. It allows you to control a wide range of home appliances and office equipment (lights, power lines, garage doors, curtains, security systems, radiators, air conditioners). Shelly 2.5

Development board with SAMD21 microcontroller (ARM Cortex® M0+), 8 I/O lines, 12 PWM channels, micro-USB. The board is equipped with the ATSAMD21 module and SARA-U201 U-blox enabling the implementation of communication in GSM networks. Arduino MKR GSM 1400 ABX00018

AVT kit for mounting a 2-channel MIN-MAX thermometer with an alarm. AVT1999 B