KAmodPCF8883T is a module with capacitive touch sensor PCF8883 from NXP. The module has a probe placed on the PCB and a diode indicating the state of the chip. It enables work in one of three modes.

4-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends

S380 is a miniature bridge rectifier in an SMD package, offering up to 0.8 A current at voltages up to 380 V. It is used in compact power supplies and electronic modules with limited installation space.

AMS1117CD-1.8, 1A low drop voltage regulator 1,8 V, TO-252

6-wire cable, 10 cm long, with a JST SH-1.0 female plug at both ends

Connector for connecting a 10-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-10PF

8-bit Bidirectional Voltage Converter

A set of 40 pieces of female-female connecting cables in various colors, 10 cm long

LED 0805 yellow, 100 mcd (20 mA) (2.0 V)

KAmodLSM303C is a module with the MEMS LSM303C chip from STMicroelectronics. The chip has a digital signal output (I2C or SPI bus) and allows measurement of accelerations and magnetic field values in three axes

The module with the sensor for the measurement of the concentration of carbon monoxide (MQ-7), allows the measurement of the concentration of carbon (CO) in the air. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.

Connector for connecting a 6-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-06PF

The DC-DC Step-down Converter Module with the LM2596S chip allows you to convert the voltage from the range of 3-40 V to a regulated output voltage of 1.5-35 V with high efficiency up to 92%. The maximum output current is 3 A, and the operating frequency is 150 kHz. The compact design with dimensions of 43 × 21 × 14 mm, the possibility of precise voltage regulation and a pinout of 2.54 mm facilitate the integration of the module in DIY projects, power supply systems, modeling and laboratory stations. The operating temperature range is from -40 to 85°C

Module with NXP temperature sensor. It allows you to measure temperature in the range from -55 °C to +125 °C. I2C interface. The board is equipped with a Pmod I2C standard connector and a KAMAMI connector

8-wire cable, 20 cm in length, with female JST SH-1.0 A-A connectors on both ends.

Pin strip straight in black, double-row, female with 2x13 system, 2.54mm pitch and elongated legs (12mm). Thru-hole mounting strip (THT). PBD26S L

The sensor allows you to measure the temperature and set the threshold for switching / triggering the alarm output, thanks to which it can act as a temperature watchdog. Measurement range from -55 to + 125 degrees Celsius; SO8 housing.

Pin header goldpin blue 2x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.

Module with a 4-bit bi-directional voltage level converter. It allows you to connect digital interfaces with different operating voltages. KAmodNTS0104PW

Connector for connecting a 16-pin ribbon with 0.5 mm pitch to a printed circuit board. F0500WR-S-24PF