INEMO system: 3D accelerometer and 3D gyroscope in LGA16L housing, made by STMicroelectronics. Allows measurement of acceleration up to 16g and angular velocity up to 2000 degrees / second, communication takes place on the I2C / SPI bus

Module with 1.3 "OLED display with a resolution of 128 x 64 pixels, thanks to the SH1106 driver and communication via the I2C bus is an ideal solution to build a device with a spectacular appearance and reliable work

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5252

The Microchip system in the DIP8 housing, a dual driver, allows the MOSFET transistors to be controlled with a high switching speed. The controller is characterized by low power consumption, high current efficiency when loading eg gate capacity, or ESD resistance up to 4kV

LCD display 2x16, 80x36mm, LED backlight (RED), mark 4.24mm, RoHS. ART016002E33-DIR-R

ATTINY44A-PU

ATtiny44A-PU is a microcontroller from the AVR family in the DIP14 housing, it is equipped with memory: 2 kB Flash, 128 B SRAM, 128 B EEPROM. The power supply voltage is 4.5..5.5 V, the maximum clock speed is 20 MHz.

USB 3.0 Type A Panel-Mount Connector IP68 with 0.5 m Cable is a durable and secure solution for applications requiring protection against external factors. Ideal for industrial control systems, outdoor electronics, machinery, and off-road vehicles where reliable USB connectivity is essential.

Two camera modules with OV9282 sensor and global shutter, offering 1 MP (1280x800) resolution and high image capture speed (up to 255 FPS), making it ideal for applications requiring minimal latency, such as video analysis or monitoring. With the built-in ISP processor and advanced 3A algorithms, the camera provides optimal image quality, and the possibility of manual exposure and white balance adjustment allows for adaptation to different lighting conditions. Luxonis OAK-FFC OV9282 (pair)

Camera module with OV9282 sensor and global shutter, offering 1 MP (1280x800) resolution and high image recording speed (up to 255 FPS), making it ideal for applications requiring minimal latency, such as video analysis or monitoring. Thanks to the built-in ISP processor and advanced 3A algorithms, the camera provides optimal image quality, and the possibility of manual exposure and white balance adjustment allows for adaptation to different lighting conditions. Model with a wide-angle lens with a viewing angle of up to 150 °. Luxonis OAK-FFC OV9282 W

Camera module with OV9782 sensor and global shutter, offering 1 MP (1280x800) resolution and high image capture speed (up to 255 FPS), making it ideal for applications requiring minimal latency, such as video analysis or monitoring, while maintaining the full color palette. Thanks to the built-in ISP processor and advanced 3A algorithms, the camera provides optimal image quality, and the possibility of manual exposure and white balance adjustment allows for adaptation to different lighting conditions. Luxonis OAK-FFC OV9782

Camera module with OV9782 sensor and global shutter, offering 1 MP (1280x800) resolution and high image recording speed (up to 255 FPS), making it ideal for applications requiring minimal latency, such as video analysis or monitoring, while maintaining the full color palette. Thanks to the built-in ISP processor and advanced 3A algorithms, the camera provides optimal image quality, and the possibility of manual exposure and white balance adjustment allows for adaptation to different lighting conditions. Model with a wide-angle lens with a viewing angle of 150 °. Luxonis OAK-FFC OV9782 W

The board is designed to work with the Sunny MTP006 pTOF camera module, compatible with the OAK-FFC-3P, OAK-FFC-4P and DepthAI RPi HAT boards. Equipped with a 224x172 sensor, it provides precise depth measurements in the range of 20 cm to 4 m with an accuracy of less than 2% and a viewing angle of 70.7° DFOV, and communication is via a MIPI 2-lane interface with a supplied 3.3V power supply. Luxonis OAK-FFC-pToF

Time-of-Flight (ToF) camera module with 33D ToF sensor offering precise depth measurements in the range of 20 cm to 6 m at VGA resolution (640x480) and up to 45 FPS. It provides 82.3° DFOV, making it ideal for a wide range of applications. The built-in ToF sensor features precise measurements, and thanks to the MIPI interface and 26-pin FFC connector, the module guarantees reliable communication and easy integration with systems. Luxonis OAK-FFC ToF 33D

Flexible prototyping platform with built-in OAK-SoM-PRO module, offering 4 TOPS of computing power (1.4 TOPS for AI) and support for neural networks, ideal for advanced computer vision projects. With support for multiple models and simultaneous support for up to 4 camera modules, this platform allows easy hardware customization to specific needs, offering resolutions up to 4K/30 FPS and support for various image processing functions. Luxonis OAK-FFC-4P

LCD TFT 3.50 ", 320x240, without controller, no touch panel, Winstar, RoHS

The dual-band 2.4 GHz and 5 GHz antenna with a 5 dBi gain and RP-SMA male connector provides stable connections for routers, Mini PCI cards, and other devices. With its omni-directional design and flexible construction, it offers wide signal coverage, while the included SMA-to-u.FL pigtail cable enhances its versatility in IoT applications.

LCD TFT 3.50 ", 320x240, SSD1963 controller, without touch panel, Winstar, RoHS

The internal WiFi antenna with a 3 dBi gain, supporting 2.4 GHz and 5.8 GHz frequency bands, provides stable wireless connections for devices such as Mini PCI cards, cameras, USB adapters, and network routers. Available with RP-SMA or SMA connectors, it ensures easy integration with a variety of network equipment. Its flexible rubber construction allows for optimal positioning to achieve the best signal.

A test lead with a 4 mm banana plug on one end and an insulated alligator clip on the other allows for easy and safe connections in various testing applications. Thanks to its flexible cable and standard connectors, it is compatible with most measuring devices, such as multimeters and oscilloscopes. The insulation on the alligator clip provides additional protection during use, enhancing workplace safety.