LPWA antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an SMA connector. Waveshare SMA 868 Antenna

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 512kB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.71 ... 3.6V, 100LQFP, STM, RoHS

A two-wire, serial extender for I2C bus, SMBus and HDMI DDC, working at 2.7 V - 5.5 V. The system has a TSSOP8 housing. PCA9507DP

External waterproof LPWA antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. It is mounted using the built-in magnet in the cradle. Waveshare 868/915M Magnet Mount Antenna

Aluminum extensometer beam, allowing measurement of weight up to 20 kilograms. It has four wires. It is used in kitchen scales and portable scales, it has a 21 cm cable, RoHS.

A 10.1" IPS LCD display with touch panel. It is equipped with an HDMI/USB type C interface for video display and USB type C for the touchscreen. It offers a resolution of 1280x800 pixels and has an aluminium casing. Waveshare 10.1HP-CAPLCD Monitor

Integrated Circuit - Interface - I / O Expanders 8bit I / O Expnder, DIP16, Texas Instruments, Rohs

Quectel RM520N-GL IoT module with M.2 connector. Supports communication within 5G, 4G and 3G networks and supports GNSS positioning within GPS, GLONASS, BDS and Galileo systems. Waveshare RM520N-GL

IPS 11.9" LCD display with touch panel dedicated for Raspberry Pi. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 1480x320 pixels. Waveshare 11.9inch DSI LCD

The 8-channel ULN2803A system enables controlling high-current loads from a low-voltage logic level. Adapted for surface mounting, it is used in automation systems, motor control, and microcontroller circuits.

Step-Down DC-DC converter module based on the D36V6F12 system. Input voltage 12.2.50V, output voltage 12V (max. 600mA). Pololu 3796

STPS2L40AF is a low-voltage Schottky diode with low conduction losses and high efficiency, ideal for switching power supplies, DC/DC converters, and polarity protection. Its compact package and avalanche ruggedness make it well-suited for space-constrained applications.

Sewable with a 3-pin JST wiring adapter with 3 holes on the board perfect for conductive thread or soldering, wired to a single 3-pin JST-PH Adapter. Sdafruit 2566

Module with 1 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4141

7-segment LED display, 1 digit 13.20 mm, black background green (630nm), 10 ucd (10mA), common anode, red (630nm), 6 mcd (10mA), common anode. Pb-free. LED1-AS-B-05219BMRMG

The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT

Module with 31 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4431

Recognizes the distance of an object away from the sensor up to about 10 inches (~25cm) and the location of the object from side to side across the sensor in about a 6 inch (~15cm) span. You will be able to use I2C or UART to communicate with the ZX Sensor via an Arduino-based microcontroller as well as a computer. SEN-12780

Bluetooth 2.1+EDR module for mounting in SMD technology with a fully configurable UART interface (transfer speed up to 2 Mb/s). SparkFun WRL-12575

Module with IPS touch LCD display with a diagonal of 4.3" and a resolution of 800x480 pixels. It uses a 24-bit parallel interface for displaying the image and I2C for the touch panel. Waveshare 4.3inch Capacitive Touch LCD