Camera module with 5MP USB interface and IMX335 sensor. Equipped with manual focus. Waveshare IMX335 5MP USB Camera (A)

IPS, 1280×800, 10.1 inch Capacitive Touch Screen LCD, Supports Multi mini-PCs, Multi Systems, for Raspberry Pi and other boards

Set of 10 pieces of gray male-male cables with a length of 15 cm for contact plates. CAB_M-M (10-15 GR)

This electromagnetic transducer is a compact way to add sound to your embedded project. Pololu 1484

Module with e-Paper display, diagonal 7.5" and resolution 800×480px. Communication via SPI. Waveshare 7.5inch e-Paper HAT

FPC/FFC 34-pin adapter with 0.5mm pitch for DIP holes 2.54mm pitch.

Module with 2.4 GHz transceiver system (transmitter and receiver) LT892. It is powered with the voltage of 3.3 V and has a built-in antenna

TSX3702IYDT, Micropower dual CMOS voltage comparators, SO8

UART - RS232 converter with DB9 socket. Waveshare rs232-board

SATA III cable, 50 cm long, with a connector at a 90° angle. Akyga AK-CA-51

Tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. Operating voltage range from 0 V to 11 V, built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. Pololu 2990

A set of 10 colored test leads, 28 cm long, ended with a spring probe

WiFi module developed by AI-Thinker Co., Ltd with ESP8266 processor. Integrates a 32-bit MCU microcontroller with 80 MHz clock, RTOS support, Wi-Fi and antenna. The module supports the IEEE802.11 b / g / ni standard and has a complete TCP / IP protocol stack. AI-Thinker ESP-12S

KSZ9031RNXCA, Gigabit Ethernet Transceiver with RGMII Support, QFN-48

HDMI cable compliant with the HDMI Premium High Speed with Ethernet specification, allows you transmit a 4k resolution image at 60 Hz, 0.5m cable length. Lanberg CA-HDMI-20CU-0005-BK

Power cord with a length of 78 cm, terminated with a USB type A plug and a 2.5x0.7mm DC plug

Handheld RFID card reader enabling card duplication. It allows you to read data from one card and write it to the other

Module with 6-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Angled male socket, wire-board type, for JST PH-2.0 wires, 3-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

Module with MOSFET transistor, 5-36 V, 20 A, switching frequency 1 kHz. DFRobot DFR0457