Module with a color LCD TFT display with a diagonal of 0.96" and a resolution of 160x80 pixels. It uses the ST7735 controller and communicates via the SPI interface. DFRobot DFR0847

UART-RS485 converter module based on the TD (H) 541S485H chip. Equipped with power isolation and TVS. DFRobot DFR0845

C-mount lens. Focal length 50mm, FoV 10°(H), 7°(V). Designed to work with the Raspberry Pi HQ camera. ArduCAM LN054

LM386 audio amplifier module. It is supplied with the voltage ranging from 4 to 12 V. The set includes an 8 Ω, 0.5 W loudspeaker. DFRobot DFR0064

Color sensor with a range from 8 to 16 mm. It offers 3 operating modes and can be powered with the voltage from 12 to 24 V. DFRobot SEN0506

4-digit, 8-segment LED display module with 8-level brightness adjustment. Communication via the I2C interface. DFRobot DFR0645-G

4-digit, 8-segment LED display module with 8-level brightness adjustment. Communication via the I2C interface. DFRobot DFR0645-R

IPS LCD display with a diagonal of 7.9" with a touch panel and built-in Hi-Fi speakers. It is equipped with an HDMI interface and offers a resolution of 400 x 1280 pixels. Waveshare 7.9inch Touch Monitor

IPS LCD display with a diagonal of 7.9" with built-in Hi-Fi speakers. It is equipped with an HDMI interface and offers a resolution of 400 x 1280 pixels. Waveshare 7.9inch Side Monitor

CS-Mount lens. 16 mm focal length, 24° FoV, manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN050

Adafruit VL53L0X Time of Flight Distance Sensor is a laser distance sensor using the ToF (Time of Flight) measurement technique. The module is powered by 2.8 ... 5V voltage and can measure up to 1000mm. Adafruit 3317

Module with an analog gas sensor. It allows you to measure the concentration of NO, NO2 and H2. DFRobot SEN0441

CS-Mount lens. 25 mm focal length, 14° FoV, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN041

Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460

Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a red nylon braid

The multi-mode (SM) fiber optic patchcord with LC cand SC connectors in a duplex configuration is a high-quality cable designed for fast and reliable data transmission in fiber optic networks. Made with OM3 fiber and featuring an LSZH jacket, it ensures low attenuation and high bending resistance, making it ideal for telecommunications, data centers, and other professional network installations. FO-LUSU-MD31-0020-TQ

Compact stepper motor controller with the TMC2208 system with operating voltage from 4 to 35 V. It offers smooth, quiet operation, high efficiency, various operating modes and easy configuration. It is controlled via the STEP/DIR interface and is an ideal solution for 3D printers and similar applications

Module with 7 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4407

Module with a 7-color ACeP e-Paper display with a diagonal of 4" and a resolution of 640x400 px. SPI interface. Pimoroni PIM600

A miniature lidar distance sensor that detects objects up to 15 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5554