Grove2USB-C – an adapter that enables easy connection of Grove modules to devices with a USB-C port. M5Stack A140

PIR motion sensor module for Arduino and Raspberry Pi. DFRobot SEN0018

Tic T500 USB is a stepper motor driver based on the MP6500 chip. It allows you to control the stepper motor whose voltage on the coil is 4.5-35V, the maximum current per coil is up to 1.5A. The controller can be controlled by: USB, TTL, I2C, RC (PWM model) etc. Pololu 3134

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M0+, 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, USB, ADC, DAC, LQFP32, RoHS

Range finder with a measuring range up to 12m. The current consumption is up to 120mA and the supply voltage 4.5 ... 6V. Communication via the UART interface. DFRobot SEN0259

Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3763

A computer performance monitor that allows you to display CPU, GPU, RAM and disk usage. It has a built-in microphone and an audio spectrum display function. It is connected to the computer via a USB port. Waveshare 4inch USB Monitor W

Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030

5 MP CMOS camera with M12 lens and Rolling Shutter, designed for IoT, monitoring and automation. Communicates via SPI interface, works with popular microcontrollers (Arduino, ESP32, STM32, Raspberry Pi Pico), offers low power consumption and high image quality with <1.53% distortion. Supports JPEG, RGB, YUV formats and allows you to connect up to 4 cameras simultaneously; integration facilitated by open SDK under MIT license. ArduCAM B0436

An advanced 5MP camera with an SPI interface, it boasts low power consumption, high image quality, and broad compatibility with popular microcontrollers such as Arduino, ESP32, STM32, and RISC-V. This model is equipped with an M12 NoIR lens with manual focus, enabling image capture at night and in low-light environments. An open API and MIT-licensed SDK make the camera ideal for IoT systems, industrial automation, educational, and environmental projects. ArduCAM B0437

Kinetis E Series Cortex-M0+, 32-bit MCU, 8KB Flash, TSSOP16, Freescale, RoHS

OLED display 128x64 1.54 "AA, 3V SPD0301 I2C SPI Parallel White, working temperature from -40 to +70 ext. 12V

OLED display 1.5 ", resolution 128x128 pixels, 3V SSD1327 SPI GRAY SCALE, work temp. From -40 to +70.

Wi-Fi module for monitoring photovoltaic systems, supporting Modbus TCP/RTU, TCP/UDP/HTTP protocols and providing easy Plug-and-Play configuration. It is characterized by IP65 waterproof, 24/7 operational stability thanks to watchdog functions and the possibility of remote access and monitoring of renewable energy systems. PUSR USR-S100-WA12

Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231

ARM®-based 32-bit MCU, up to 32 KB Flash, crystal-less USB FS 2.0, CAN, 8 timers, ADC & comm. interfaces, 2.0 - 3.6 V, TSOOP20, STM, RoHS

SEN-13314