A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 4x1,7mm DC plug used in Lenovo laptops. Length 1.8 m

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 15 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 3 m

Power cord with a built-in Power Delivery (PD) trigger with a working voltage of 9 V. Has a USB type C connector and a DC plug 5.5x2.5 mm. Length 1.2 m

ATtiny13-SSU is a microcontroller from the AVR family in the SOIC8 housing, it is equipped with memory: 1kB Flash, 64 B SRAM. The power supply voltage is 1.8..5,5 V, the maximum clock speed is 20 MHz.

Module with USB 2.0 type C connector with 2.54 mm pitch goldpin connectors. Polol 2585

GNSS antenna enabling tri-band reception (L1/L2/L5) for the GPS, GLONASS, Galileo and BeiDou constellations. Uses an SMA connector. Waveshare GPS External Antenna (E)

A 20x15 mm knob with an internal diameter of 6 mm. For mounting on a potentiometer or rotary encoder

Pmod MicroSD is a module with a microSD memory card reader. With the help of the module it is possible to read and write data on the microSD memory card without limiting the file system or the maximum card size. The SPI interface is used for communication. Digilent 410-380

2 MPx camera with USB 2.0 interface. Equipped with an AR0230 CMOS sensor with a 95° viewing angle lens. ArduCAM B0438

Module with barcode and QR code scanner. Allows one-dimensional and two-dimensional codes to be read using an intelligent image recognition algorithm. It has a built-in USB and UART interface. Waveshare Barcode Scanner Module (C)

WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.

Finder 39.31.0.024.0060 is a SPDT interface relay, operating at a coil voltage of 24V DC, capable of switching currents up to 6A at 250V AC on a single contact. Mounted on a 35 mm DIN rail mounting base, it provides quick assembly and disassembly, ideal for saving space in control cabinets.

ARM Cortex-M4 MCU, 128 KB Flash, 64kB SRAM, 84 MHz CPU, DSP with FPU, Art Accelerator, LQFP64, STM, RoHS

Gravity: Digital Capacitive Touch Sensor is a capacitive touch sensor powered by 3.3V ... 5V voltage. DFRobot DFR0030

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0500-W

Male terminal block, angled, 5-pin. Pitch 3.81mm. Height 7mm. 15EDGRC. Set of 10 pieces

The EDB4432BBBJ-1D-F-D is a 4-gigabit LPDDR2 SDRAM memory chip from Micron Technology, offering an organization of 128M x 32 bits and a maximum clock frequency of 533 MHz. It operates within a supply voltage range of 1.14 V to 1.95 V and is housed in a 134-pin WFBGA package with dimensions of 10 x 11.5 mm.

32-bit microcontroller from the STM32L1 family (low power series) with ARM Cortex-M3 core, 256kB Flash memory, 32kB RAM, 8kB EEPROM, clock speeds up to 32MHz and I2C, SPI, UART / USART interfaces, USB DMA, PWM, WDT, A / D 12b in the LQFP64 housing. STMicroelectronics STM32L152RCT6

Pulse Electronics JK0-0136NL is a single-pass RJ45 connector module (ICM) for 100/1000 Base-T connections, designed for network cards, LAN-on-Motherboard solutions and computer applications. Compatible with the IEEE 802.3 standard, provides high performance and EMI suppression, available in TAB-UP configuration with green and yellow LEDs.