SEN-13582

The shield provides the standard MIDI port circuits, incl. 5-pin DIN connectors, pto-isolated MIDI input, LEDs on D6 and D7, pushbuttons on D2, D3 and D4, and rotary potentiometers on A0 and A1. DEV-12898

The Microchip system in the DIP8 housing, a dual driver, allows the MOSFET transistors to be controlled with a high switching speed. The controller is characterized by low power consumption, high current efficiency when loading eg gate capacity, or ESD resistance up to 4kV

STP10NK60ZFP, N-MOSFET 10A 600V 0.65 Ω, TO-220FP

Female terminal block, 2-pin. Pitch 3.5mm. Height 15.6mm. KF2EDGK. Set of 10 pieces

INEMO system: 3D accelerometer and 3D gyroscope in LGA16L housing, made by STMicroelectronics. Allows measurement of acceleration up to 16g and angular velocity up to 2000 degrees / second, communication takes place on the I2C / SPI bus

Female terminal block, 5-pin. Pitch 3.5mm. Height 15.6mm. KF2EDGK

LilyPad reed switch in a black insulated casing preventing the element from breaking. SparkFun DEV-13343

Female terminal block, 7-pin. Pitch 3.5mm. Height 15.6mm. Set of 5 pieces

The cable allows you to attach a USB device (eg keyboard, mouse, Flash memory) to the device with microUSB OTG connector. The cord has a length of 14cm

A four-port USB 2.0 hub that allows data transfer at speeds up to 12Mbit / s. It has a black housing and a 45cm long cable

USB splitter allowing to connect up to 4 USB devices. It has a cable with a length of 80cm, a power indicator and the possibility of powering from an external source with a microUSB connector

Male terminal block, angled, 3-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR

A small USB 2.0 hub that allows you to disable individual devices connected to its USB ports, as well as a visual evaluation of the number of devices enabled. It has a built-in connector for the external power supply, so it can act as an active hub. Cable with a length of 40cm, 4 USB ports

IPS 11.9" LCD display with touch panel dedicated for Raspberry Pi. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 1480x320 pixels. Waveshare 11.9inch DSI LCD

The Texas Instruments H-bridge allows control of two DC brush motors or one stepper motor. The supply voltage of the motor is in the range of 0-11V, maximum current efficiency 1.5A / bridge. The system has a 12WSON housing

A module with a distance and gesture sensor that allows the detection of objects in two axes (x and z) and the detection of simple gestures. It communicates via the I2C or UART interface. SparkFun SEN-13162

16-channel GPIO expander with an I2C interface microcontroller can interface with 16 fully configurable digital input/output pins. It can produce PWM signals, so you can dim LEDs. It can be set to blink or even breathe pins at varying rates. With a built-in keypad engine, it can interface with up to 64 buttons set up in an 8x8 matrix. BOB-13601

Female terminal block, 8-pin. 3.5 mm pitch. Height 15.6 mm. GOLTEN 15EGTK-3.5-08P-14-00AH. Set of 5 pcs