The Adafruit 5974 module with the HX711 converter enables precise reading of signals from strain gauges and load cells based on a Wheatstone bridge, offering 24-bit resolution and selectable gain. With an integrated screw terminal and options for sampling rate and channel configuration, it is used in projects involving force, pressure, or weight measurement in IoT systems, electronic scales, and mechanical testing.

Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-0100-W

STM32L552RET6, Ultra-low-power with FPU Arm Cortex-M33 with Trust Zone, MCU 110 MHz with 512 kbytes of Flash memory, LQFP64

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0150-G

PCAL6408APW, 8-bit I2C-bus/SMBus I/O expander with interrupt output, TSSOP16

Touch button with red LED backlight. Powered with the voltage in the range from 2.7 V to 6 V, it works with 3.3 V systems

A single high-throughput operational amplifier in the SOT23-6, 10 MHz, 17.7 V / μs housing, 4V to 16V. STMicroelectronics TSX920ILT

The Gravity Occupancy Sensor uses 24 GHz FMCW radar technology, enabling precise presence detection at a distance of up to 8 meters and movement and distance measurement up to 12 meters. Thanks to its high resistance to environmental interference, it works reliably regardless of light, temperature or dust, effectively detecting both static and dynamic objects. Compatibility with Arduino, ESP32, Raspberry Pi and a simple Gravity interface make it an ideal solution for intelligent lighting, building automation and security systems. DFRobot SEN0610

Module with 4-channel ADC ADS1015 converter. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 1083

Tilt sensor 45 degrees, E-Switch, RoHS

Flexible LED (LED filament) in white, length 300 mm

Unshielded UTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCU6-10CC-0025-B

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Beige color

TS391IYLT, Low power single voltage comparator, SOT-23-5

Two-channel driver of direct current (DC) motors with an operating voltage from 4 to 16 V and a maximum continuous current of 3 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD3A

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Orange color

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5263

Module with temperature sensor MCP9808. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020556

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0200-Y