Shielded FTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCF5-10CC-1000-G

IC socket in DIP40 package, 40-pin, 2.54 mm pitch, 15.24 mm pitch, RoHS

BLE Beacon, which emits Bluetooth Low Energy signals, enabling discovery by Bluetooth devices such as smartphones or ESP32 without the need for pairing. With a built-in I2C interface and an 11-bit ADC, it allows data collection from various sensors, and its low power consumption (650nA in sleep mode) ensures long-lasting operation on a single battery, ideal for applications requiring mobility and long range. DFRobot TEL0168

LoRa module based on Semtech SX1262 chip, supporting 868/915 MHz band and providing stable operation thanks to the use of TCXO. It is characterized by transmit power up to 22 dBm, receiver sensitivity -136.73 dBm and low power consumption, which makes it ideal for battery-powered IoT devices. Seeed Studio 114993390

3.5" LCD IPS display with touch screen. The display is equipped with an SPI interface for image display and touch screen operation. Resolution 480x320 pixels. Waveshare 3.5inch RPi LCD (B)

The HTC-2 is a reliable and functional weather station with temperature and humidity measurement, clock, alarm, and memory for min/max values, ideal for home or office use.

MEMS microphone module that will allow voice detection, sound recording or audio transmission. It communicates via an I2S interface. DFRobot SEN0526

Expansion module designed for Raspberry Pi or BIGTREETECH CB1. It allows you to add a CAN interface and use minicomputers for control in industrial or automotive applications. BIGTREETECH IO2CAN V1.0

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets. Adafruit 954

Module with JST-ZH 1.5 mm connector dedicated to micro motors. Sideway assembly, set of 2 pieces. Pimoroni PIM603

ARM®-based 32-bit MCU, 256 KB Flash, CAN, 12 timers, ADC, DAC & comm. interfaces, 2.0 - 3.6V, LQFP64, STM, RoHS

The LM358P is a versatile operational amplifier for applications requiring low quiescent current and high stability, suitable for a wide range of analog circuits with single or dual supplies

8-bit MCU, 8 KB Flash, 1 KB RAM, 128 B EEPROM, SPI, I2C, UART, ADC, LQFP32, STM, RoHS

Module with JST-ZH 1.5 mm connector dedicated to micro motors. Simple assembly, set of 2 pieces. Pimoroni PIM602

DC-DC step-down converter module 5V 16A used to convert energy from 6-24V input voltage to stable 5V, providing up to 16A current. Thanks to high conversion efficiency (over 90%) and low ripple (<20mV), it is ideal for powering sensitive devices in applications such as robotics, drones or LED lighting systems. Additionally, built-in overheating and short-circuit protection mechanisms ensure reliable operation even in difficult conditions. DFRobot DFR1202

Module with a 2.13" black and white e-Paper display. Equipped with an SPI interface for image display and I2C interface for a touch panel. Waveshare 2.13inch Touch e-Paper HAT (with case)

Crowtail-Rotary Angle Sensor 2.0 is an analog rotary-angle sensor with a 300° range, ideal for value adjustment in electronic projects. It is used in lighting control, volume regulation and user interfaces.

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano