The ACS71240 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 120 kHz) and low conduction resistance (0.6 mΩ), it minimizes energy loss and offers a fast response time of less than 5 µs. Pololu 5240

ARM Cortex-M3 CPU, 256kB Flash, 64kB RAM, Ethernet, USB OTG FS, 2xCAN, 5xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP100, RoHS

The 7-inch HMI module based on the Raspberry Pi 5, with 4 GB RAM, 32 GB SD card and M.2 SSD slot, offers versatility in IoT and industrial automation applications. Equipped with a Broadcom BCM2712 processor (Cortex-A76, 2.4GHz), dual-band Wi-Fi, Bluetooth 5.0, dual 4Kp60 HDMI output, RS232/RS485, and a 1024x600 touchscreen, it provides performance, reliability and precise operation in harsh environments. Edatec ED-HMI3020-070C-04320

Pin strip straight in yellow, double-breasted, female, 2x9, pitch 2.54mm, THT, RoHS. Set of 10 pieces PBD18S Yellow

Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT

MMA8653FC, 3-Axis 10-bit Digital Accelerometer, DFN-10

Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)

DFRobot Gravity analog light intensity module for Arduino and Raspberry Pi. DFRobot DFR0026

Module of a 4-channel driver of DC motors with RP2040 microcontroller. It allows the connection of encoders and is equipped with a QW/ST connector. Pimoroni PIM636

USB 2.0 cable with USB Type-C (m) connectors on both ends, intended for charging devices with power up to 60W and for data transmission, 1 m length, green silicone insulation. Akyga AK-USB-69

Module with LPG gas concentration sensor (MQ-6) in the range of 200 - 10,000 ppm. The module has an analogue output and a digital output triggered by exceeding the threshold of sensitivity. modMQ-6

A power cable with a built-in Power Delivery (PD) trigger with a working voltage of 20 V. It has a USB type C connector and a 7.4x5mm DC plug used in Dell laptops. Length 1.8 m

WiFi module based on ESP8266. It has an embedded antenna and 0.96 "OLED display. The module can be programmed in Lua (under NodeMCU firmware control) or in the Arduino IDE. Provides 12 GPIO lines.

Lanberg brand power cord from CEE 7/7 to IEC 320 C13 for PC, laptop and server power supplies. Lanberg CA-C13C-10CC-0018-BK

USB 2.0 cable with USB Type-A (m) and USB Type-C (m) connectors, intended for charging devices with power up to 18W and for data transmission, 1 m length, green silicone insulation. Akyga AK-USB-64

The holder allows for quick connection of the fuse to the device\'s power supply. The threaded design and wires on both sides facilitate installation in DIY projects, vehicle installations, and electronic module power systems. Suitable for building and servicing systems requiring individual current protection

Pololu 4814 is a set of two JST SH 4-pin top-entry adapters that allow easy integration of JST SH wires with breadboards and prototype boards. With support for voltages up to 50 V and currents up to 1 A per pin, these adapters are suitable for a wide range of applications in electronics and automation.

A BLDC motor control board with a Field-Oriented Control algorithm, based on the ESP32 WROOM 32D module. It supports 12-24V DC, two channels with a peak current of 12A, and dual-channel real-time current sensing with a range of ±33A. Support for Hall, SPI, I²C, ABI, and analog sensors provides flexible integration in projects such as robotics, balancing vehicles, and gimbals. Makerbase MKS ESP32 FOC V1.0

Gravity: DS18B20 Temperature Sensor is a module with a temperature sensor compatible with Arduino boards. The module can be supplied with 3.3-5V voltage and measures the temperature in the range -55 ~ 125 ° C. DFRobot DFR0024