An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous currents up to 1.3 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4971

Audio module with speakers designed to work with the Raspberry Pi Pico. Waveshare Pico-Audio

Flexible RGB LED matrix display with 64x64 resolution (4096 LEDs). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P3-64x64-F

An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972

The audio adapter with a 15-cm cable allows you to connect headphones with two 3.5 mm plugs to devices with one jack socket. This makes it possible to use traditional headsets with modern devices. Akyga AK-AV-08

16-channel IO expander with 7 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Version with connector at the top. Numato Lab GP160002

A complete 18-in-1 measurement kit for multimeters and oscilloscopes, containing a wide selection of leads and tips. It supports voltages up to 1000 V and peak currents up to 20 A, providing universal applicability in service work, laboratories, and field measurements.

The ACS72981 current sensor module uses the Hall effect to precisely and safely measure DC current while providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes power loss and offers a fast response time of less than 2 µs. Pololu 5264

Step-Down converter D36V50F6 with an output voltage of 6 V, an input voltage from 6.5 to 50 V and a maximum output current of 8 A. Pololu 4092

Cable with USB plugs type A and micro-USB type B, cable length 1m. The cable has a light pink nylon braid

LED matrix display module (in red color) with an organization of 14 columns x 9 lines, compatible with Arduino.

827229-1 is a 12-pin connector for THT mounting, suitable for automotive systems using TE\'s Timer contact technology. Designed for robust and reliable interconnections in demanding environments.

Monochrome camera module based on CMOS MT9M001 matrix with a resolution of 1280x1024 px (1.3 MPx). Designed for use with ArduCAM USB Shield. ArduCAM B0159

Module with a 3-color e-Paper display with a diagonal of 7.5" and a resolution of 800x480 px. Communication via the SPI interface. Waveshare Pico-ePaper-7.5-B

LTE Cat 4 module that supports wireless communication over LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS and EDGE technologies. FPC antenna included. Waveshare SIM7600G-H 4G Module

Gravity: Formaldehyde (HCHO) Sensor is a module for measuring the concentration of formaldehyde (methane) in the air. It can be supplied with voltage in the range of 3.3 ... 6V. DFRobot SEN0231

A module with a 1.83" IPS color LCD display with a resolution of 240x280 pixels. It has rounded corners and uses the NV3030B controller (SPI interface). Waveshare 1.83inch LCD Module

Module with a flexible e-Paper display with a diagonal of 2.13" and a resolution of 212x104 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13-D

LCD TFT 5" display with touch screen. The display is equipped with an HDMI interface and USB for touch screen. Resolution 800x480 pixels. Waveshare 5inch HDMI LCD (H) V4

The Kruger & Matz HDMI / HDMI (AA) cable is used to transfer video and audio. Allows you to connect DVD and Blu-Ray players to a TV or monitor. KM0329