

zł13.86 tax excl.
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972
The Pololu TB67H453FNG (QFN) module is a compact H-bridge board that enables bidirectional control of a single DC motor or two unidirectional motors. The driver supports motor supply voltages in the range of 4.5 V to 44 V and provides a continuous output current of up to 1.1 A, with a default current limit set to around 2 A. Thanks to the built-in current sensing and regulation, it allows safe motor control without additional sensors, while integrated protections safeguard the system against overcurrent, overheating, and undervoltage. Additionally, the board includes reverse power connection protection, improving its resilience to wiring mistakes.
The TB67H453 driver requires a motor supply voltage in the range of 4.5 V – 44 V, applied to the VIN pin, which is protected against reverse polarity. The VM pin outputs the voltage after the protection circuit and can power other system components, ensuring protection against wiring errors. To exit the default sleep mode, a voltage must be applied to the SLEEP pin, which also affects the current limit threshold. This voltage can be shared with the microcontroller or dynamically provided from its output, allowing convenient sleep mode management. The chip offers three control modes: PH/EN (phase–enable), PWM (IN/IN), and independent half-bridge mode, selectable via the PMODE pin. In the popular PH/EN mode, the PH pin defines the motor’s rotation direction, while a PWM signal is applied to the EN pin to regulate speed. This method is especially recommended as it requires only one PWM signal and ensures smooth and linear speed control in drive/brake mode.
Standard 2.54 mm mounting holes allow convenient use of pin headers, wires, or direct soldering onto a PCB. Thanks to its compact size, the module can be easily integrated into hobby and professional projects such as mobile robots, drive mechanisms, or automation systems. Flexible logic supply in the range of 1.8 V to 5.5 V ensures compatibility with a wide variety of microcontrollers, including popular platforms like Arduino, STM32, and Raspberry Pi. This simple-to-use and reliable solution allows for quick integration of motor control into any electronic project, ensuring high performance and safe operation.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Pin header goldpin black 1x40 pins. Angled connector for through-hole assembly. 2.54mm pitch.
Discover the latest revision of Arduino Uno - the most popular development kit in the world. The Arduino Uno in its newest iteration impresses with a three-fold increase in clock speed, eight-fold larger flash capacity, and a sixteen-fold increase in SRAM capacity. But that\'s just the beginning, as Arduino Uno also offers a wide range of additional peripherals, powered by a 32-bit Renessas RA4M1 microcontroller with an ARM M4 core. With the new Arduino Uno, you don\'t have to worry about compatibility, as the board is compatible with all shields from previous revisions. Thanks to the elaborate security systems and compatibility with existing guides and projects, Arduino Uno becomes the ideal solution for both beginners and advanced electronics enthusiasts. Arduino ABX00080
A mini-computer in version 5 with 4GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
A mini-computer in version 5 with 8GB of RAM, equipped with two microHDMI ports, 2 USB 3.0 ports, and 2 USB 2.0 ports, as well as a USB-C power connector. The processor is a quad-core Broadcom BCM2712 clocked at 2.4GHz. The board also features dual-band WiFi, Bluetooth 5.0 with BLE support, PCI Express 2.0 interface, and a real-time clock. Raspberry Pi SC1111
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3×0.8″ board supports a wide 6.5V to 40V voltage range and is efficient enough to deliver a continuous 13A without a heat sink. Driver includes reverse-voltage protection along with basic current sensing and current limiting functionality. Pololu 2992
No product available!
This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, A+, or Pi 2 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Pololu 2753
The expansion module is designed to work with the micro:bit educational board. It can control 3 servos and 2 DC motors. Waveshare Motor Driver for micro:bit
ESC RC controller module with FlySky receiver designed for two brush motors with a supply voltage from 2.5 to 5 V and a current consumption of 2 A
The pad for use with shallow Feather series contains two TB6612 chips that allow you to control DC motors or stepper motors. The I2C interface is used to communicate with the overlay. Adafruit 2927
Two-channel driver of direct current (DC) motors with a working voltage from 7 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by buttons. Cytron MDDRC10
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR
A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with connectors for assembly. Pololu 5067
No product available!
(DRI0009) 2A Motor Shield For Arduino
This compact breakout board for Maxim’s MAX14870 motor driver offers a wide operating voltage range of 4.5 V to 36 V and can deliver a continuous 1.7 A (2.5 A peak) to a single brushed DC motor. It features a simple two-pin speed/direction interface and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature.
Module with a DC motor driver based on the MC33886 chip. It allows you to control the movement of drives with a working voltage from 5 to 28 V and a current of up to 5 A
No product available!
DC motor controller powered with a voltage in the range of 1.8 to 10V with a maximum output current of 2.6A. Compatible with STM32 Nucleo. Shield is equipped with a connector compatible with the Arduino UNO R3 standard. STMicroelectronics X-NUCLEO-IHM13A1
Pololu Simple High-Power Motor Controller 18v25
No product available!
Pololu TReX Dual Motor Controller DMC01
2x1.2A DC Motor Driver is a dual controller of DC motors powered with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044
An H-bridge capable of controlling one DC motor in both directions or two unidirectional motors at voltages from 4.5 to 44 V and continuous current up to 1.1 A. The module offers three operating modes (PH/EN, IN/IN, half-bridge), built-in current limiting and measurement, and protection against overheating, overload, undervoltage, and reverse polarity. Its compact design, flexible logic power supply (1.8–5.5 V), and simple control make it ideal for robotics, automation, and hobby projects. Pololu 4972