20A Bidirectional Brushed ESC Speed Controller - ESC 20A speed controller with XT60 connector
ID: 572261
5906623405893
zł76.90
Tax included
zł62.52 tax excl.
Bi-directional ESC speed controller for brush motors. It can deliver 20 A and has cables terminated with an XT60 connector. DFRobot DRI0047
Description
Bidirectional ESC speed controller without brake dedicated to brush motors. It can supply 20 A continuous current or 320 A instantaneous current. It is PPM controlled and can control the motor's forward and reverse rotation. The controller has cables terminated with an XT60 connector and a heat sink that ensures proper heat dissipation. Can be widely used in RC remote control systems.
Features
- Bidirectional
- Dedicated to brushed motors
- Voltage range: 4,8V to 8,4V
- Continuous current: 20 A
- Instantaneous current: 320 A
- 16AWG, 100mm wire
- Control signal type: PPM
- Power connector: XT60 plug
- Motor connection: XT60 plug
- Dimensions: 42 x 28 x 15 mm (with heatsink)
- Weight: 30 g
572261
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A set of XT60 connectors (male plug and female socket with covers) with a maximum forward current of 60 A. It works well as a battery connector or a power connector in RC models. Amass XT60
zł5.47
24h
Available quantity: 65
Available
20 cm long cable with XT60 plug and two banana plugs. It allows you to connect a battery with an XT60 socket to the charger
zł8.89
24h
Available quantity: 6
Available
Power cord with a length of 45 cm with a male XT60 plug and a DC Jack 5.5 x 2.5 mm plug. It allows you to connect a battery with an XT60 socket to a device with a DC socket
zł19.90
Delivery date unknown
No product available!
Other products in the same category (16)
ESC controller module for a brushless motor with a current capacity of up to 120 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł540.73
4 weeks
No product available!
Powerful DC motor driver. It allows you to control a motor with a power supply voltage in the range of 6 ... 28 V, the motor can draw current of 100 A (using a heat sink). For the control PWM modeling (eg from RC receivers) is used in robotics, small electric vehicles or wherever there is a need to control a DC motor. Digilent 410-334-1
zł467.81
3 weeks
No product available!
The 7A 1-2S BLheli_S XSD7A Miniature Brushless Motor ESC Controller is a compact, high-performance device ideal for controlling brushless motors in small projects. Thanks to its low weight and solid power, it is suitable for drones, RC models and other applications requiring precise motor control.
zł69.00
4 weeks
No product available!
Set with ODrive3.6 ESC speed controller and MKS X2212 BLDC motor. The controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6 Kit
zł637.28
24h
Available quantity: 2
Available
Programming module for AM32 and BLS32 series ESC controllers. It allows you to easily update the controller software via the USB Type-C connector. RhinoESC Crawler
zł31.11
4 weeks
No product available!
Single-channel DC motor driver with an operating voltage from 10 to 45 V and a continuous current up to 40 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS40B
zł341.31
24h
Available quantity: 2
Available
RC type ESC controller module dedicated to DC brushed motors with a supply voltage from 4.2 V to 8.4 V and a current consumption of up to 3 A
zł18.76
4 weeks
No product available!
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
ESC controller module for a brushless motor with a current capacity of up to 40 A. It can work with LiPo packages from 3S to 6S. Uses BLHeli_32 software. Skystars Talon32
zł81.39
4 weeks
No product available!
Brushless motor driver module (ESC regulator) with current efficiency up to 20 A. Uses BLHeli_S software
zł36.79
4 weeks
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
zł64.64
24h
Available quantity: 1
Available
An advanced speed controller designed to power three-phase brushless motors in a variety of applications such as electric scooters, electric skateboards and electric bicycles. It supports an input voltage range of 8 V to 60 V, which corresponds to 3S to 13S for LiPo batteries, and a maximum current of up to 50 A. Makerbase VESC MINI 6.7 Pro
zł426.82
4 weeks
No product available!
Two-channel ESC controller for brushed motors. It can deliver 40 A and has wires terminated with an XT60 connector
zł98.97
4 weeks
No product available!
3-channel brush motor controller module with PWM signal mixing function. It allows you to control three DC motors with a current consumption of up to 15 A per channel
zł106.26
24h
Available quantity: 1
Available
ESC controller module for a brushless motor with a current capacity of up to 80 A. It can work with LiPo packs from 5S to 12S. Uses BLHeli_32 software. FLYCOLOR X-CROSS HV
zł445.74
24h
Available quantity: 1
Available
2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel
zł43.98
4 weeks
No product available!
Bi-directional ESC speed controller for brush motors. It can deliver 20 A and has cables terminated with an XT60 connector. DFRobot DRI0047