3D stereo camera module, which is built with two cameras with Sony IMX219 sensor and ICM20948 IMU sensor. It is designed to work with the Raspberry Pi Jetson Nano. Waveshare IMX219-83 Stereo Camera

LPC5512JBD100E, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 64 KB Flash, HLQFP100

IPS touchscreen LCD module with a 4" diagonal and 480x800 pixel resolution. It uses a parallel interface for the image display and SPI for the touch panel. Waveshare 4inch Resistive Touch LCD

LED segment display that allows you to display four digits consisting of 7 segments and a dot, the display can also display a colon. The color of the displayed digits is red

Expansion board with LoRa E22-400T22S module for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1268 433M LoRa HAT

Camera module with Sony IMX219 sensor designed for use with the NVIDIA Jetson Nano, Raspberry Pi, RDK X3, VisionFive2, etc. The camera is equipped with an 8 MPx sensor and has a 160° viewing angle. Waveshare IMX219-160IR Camera

Module with a 3-color (red, black, white) e-Paper display of 2.66" diagonal and 296x152 px resolution. It communicates via SPI interface. Waveshare 2.66inch e-Paper Module (B)

40-pin ZIF socket dedicated to DIP packages. It allows for multiple plugging without the risk of damaging the leads. Waveshare DIP 40 Pin ZIF Socket (Green)

Module with an incremental encoder with a rotation range of 360° and a button. Communicates via a digital interface

USB port isolator based on the ADUM3160 chip. The device has a rated insulation voltage of 1500V. The isolator is powered from the USB port.

STM32H735ZGT6, High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1 MByte Flash, 564 KBytes RAM, 550 MHz CPU, L1 cache, external memory interface, SMPS, subset of peripherals, LQFP144

Ultrasonic distance sensor with a range of up to 15m. Powered with the voltage from 9 to 24 V, it communicates via the RS485 interface. DFRobot SEN0310

Wired keyboard with a standard US keyboard layout, made of black plastic. Natec NKL-0876

Module with e-Paper display, diagonal 7.5" and resolution 800×480px. Communication via SPI. Waveshare 7.5inch e-Paper HAT

The module with a black and white OLED display, 0.96" diagonal and 128x64 pixels resolution. Equipped with an XH2.54 connector, communicates via the I2C interface

Camera module with USB interface with a resolution of 2MP. Camera with Sony CMOS IMX291 sensor, the module is equipped with two microphones. ArduCAM B0201

Module with the HR1124S DC motor controller with a maximum current of 1.2 A. It can be powered with the voltage from 1.8 V to 6.8 V and is controlled by two PWM signals

Digital shock sensor with vibration switch. It detects vibrations and signals them via a digital output

The Class D digital audio amplifier module has two channels with a power of 15 W and can work with speakers from 4 to 8 Ω. Powered with the voltage ranging from 8 to 26 V. Bluetooth communication

3-port USB hub with magnetic isolation. The rated voltage of the insulation is 2500 V. The hub is a passive device powered from the USB port. EVC9003