Module e-Paper E-Ink 2.66" 3-color 296x152 (B) - Waveshare 18915
ID: 1182292
zł60.85
Tax included
zł49.47 tax excl.
Module with a 3-color (red, black, white) e-Paper display of 2.66" diagonal and 296x152 px resolution. It communicates via SPI interface. Waveshare 2.66inch e-Paper Module (B)
Description
A module with a 3-color (red, black, white) e-Paper display with a diagonal of 2.66" and a resolution of 296×152. It has the ability to display content with a two-level gray scale. The built-in controller implements communication via SPI interface. Displays of this type feature high contrast of the displayed image and draw current only when the displayed content changes. The module has a built-in voltage level converter, making it compatible with 3.3 V and 5 V systems. Support in the form of use cases with Raspberry Pi, Jetson Nano, Arduino and STM32 is available for the module. Full documentation is available on the product page.
Features
- Diagonal: 2.66"
- Resolution: 296 x 152 px
- Display color: black, white, red
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.202 × 0.203
- Full refresh time: 15 s
- Power consumption: 16 mW
- Standby current consumption: <0.01 uA
- Viewing angle:> 170 °
- No backlight, displays last content after power off
- Low power consumption
- Built-in logic level converter, compatible with 3.3V/5V MCUs
- Operating voltage: 3.3 V/5 V
- Display size: 30.704 × 60.088 mm
- Module dimensions: 83.5 × 37 mm
Kit contains
- Display 2.66inch e-Paper Module (B)
- JST PH2.0 20cm 8-pin cable
1182292
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 2,66
- Resolution
- 296 x 152 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 150
Available
STM32 Nucleo-64 development board with STM32L476RGT6 MCU, supports Arduino and ST morpho connectivity
zł93.90
Delivery date unknown
No product available!
NUCLEO series starter kit equipped with the STM32G491RE microcontroller (512 kB Flash, Cortex-M4), with a built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-G491RE
zł91.18
Delivery date unknown
No product available!
3-color e-Paper display with a diagonal of 2.66" and a resolution of 296×152. It communicates via SPI interface. Display without PCB. Waveshare 2.66inch e-Paper (B)
zł40.33
Delivery date unknown
No product available!
Other products in the same category (16)
2.9" e-Paper display with a resolution of 296 x 128 px, supporting red, yellow, black, and white colors, featuring an SPI interface and very low power consumption. Includes a driver board. Waveshare 2.9inch e-Paper Module (G)
zł61.94
6 weeks
No product available!
Full-color 3.6 inch e-Paper display based on E Ink Spectra 6 technology with a resolution of 600x400 pixels, SPI communication, supplied in a version without a driver board. Waveshare 3.6inch e-Paper (E)
zł150.52
6 weeks
No product available!
2.9" e-Paper display with 296x128 px resolution, Red/Yellow/Black/White colors, 3-wire and 4-wire SPI interface, 3.3 V operating voltage, passively reflective without backlight, ultra-low power consumption. Waveshare 2.9inch e-Paper (G)
zł46.20
6 weeks
No product available!
The 7.5-inch eInk/ePaper display features 800x480 pixel resolution for excellent readability, even in bright sunlight. It supports three colors: black, white, and red, allowing you to clearly highlight key information. The image persists without power, making the display ideal for battery-powered applications. Adafruit 6415
zł313.56
24h
Available quantity: 1
Available
A 3.52-inch eInk/ePaper display with a resolution of 340 x 180 pixels, offering support for four colors: black, white, red, and yellow. The image remains visible without power, and the high contrast ensures excellent readability in full daylight. The display is designed for standalone integration with an external controller via a 24-pin FPC connector and is supported by popular Arduino and CircuitPython libraries. Adafruit 6414
zł101.20
24h
Available quantity: 2
Available
3.6-inch full-color e-Paper display based on E Ink Spectra 6 technology with 600x400 resolution, equipped with an HAT+ driver board featuring SPI interface and a 40-pin GPIO connector for Raspberry Pi. Waveshare 3.6inch e-Paper HAT+ (E)
zł193.86
6 weeks
No product available!
E-Ink e-paper display with a 5.83inch diagonal and 648x480 resolution, supporting four colors: red, yellow, black, and white, designed for ultra-low-power applications using an SPI interface. Waveshare 5.83inch e-Paper (G)
zł156.85
6 weeks
No product available!
E-Ink e-paper display with a 5.83 inch diagonal and 648 x 480 resolution, supporting four colors: red, yellow, black, and white, equipped with an e-Paper Driver HAT using an SPI interface, designed for ultra-low power applications. Waveshare 5.83inch e-Paper HAT (G)
zł186.96
6 weeks
No product available!
An intelligent digital photo frame based on the ESP32-S3 microcontroller, featuring a 7.3-inch full-color E Ink Spectra 6 (E6) e-paper display with a resolution of 800 × 480 pixels, enclosed in an elegant solid wood frame. The device offers ultra-low power consumption, Wi-Fi and Bluetooth connectivity, AIoT capabilities, voice interaction, and photo and information display, making it ideal for decorative and informational applications. ESP32-S3-PhotoPainter (no BAT)
zł347.29
6 weeks
No product available!
An HMI device with a 7.5-inch ePaper display with a resolution of 800x480 pixels, designed for creating energy-efficient devices and information panels. The built-in ESP32-S3 with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity, and support for platforms such as SenseCraft HMI, ESPHome, and Arduino facilitate integration with IoT systems. The device includes temperature and humidity sensors and a 2000 mAh battery, providing up to 3 months of operation in power-saving mode. Seeed Studio 100073581
zł351.85
4 weeks
No product available!
An HMI device with a 7.3-inch, color ePaper E Ink Spectra 6 display with a resolution of 800 x 480 pixels, ideal for dashboards and data visualization. The built-in ESP32-S3 microcontroller with 8 MB of RAM, along with Wi-Fi and Bluetooth connectivity, enables easy integration with IoT systems and platforms such as SenseCraft HMI, Home Assistant, and Arduino. The device includes temperature and humidity sensors and a 2000 mAh battery, providing up to 3 months of operation in power-saving mode. Seeed Studio 100017057
zł475.32
4 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and Basic Kit set (3.7 V lithium battery + 16 GB TF card + card reader) – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97-Kit
zł203.27
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 – development board with built-in RTC, IMU, temperature and humidity sensor, and AI voice interaction support (without battery). Waveshare ESP32-S3-ePaper-3.97-EN
zł167.03
6 weeks
No product available!
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and 3.7 V battery supply – development board with integrated RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97
zł173.09
6 weeks
No product available!
A 13.3-inch color ePaper display powered by E Ink Spectra™ 6 technology, providing excellent readability and low power consumption. The device is equipped with an ESP32-S3 processor, Wi-Fi and Bluetooth connectivity, and a built-in 5000 mAh battery that provides up to 6 months of operation on a single charge. Thanks to the SenseCraft HMI platform, it allows for quick content creation and remote updating without programming. SeeedStudio 100064156
zł1,379.00
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
Module with a 3-color (red, black, white) e-Paper display of 2.66" diagonal and 296x152 px resolution. It communicates via SPI interface. Waveshare 2.66inch e-Paper Module (B)