New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
e-Paper E-Ink 4-color 3" 400x168 module (G) - Waveshare 22758
ID: 1181391
5906623426843
zł75.09
Tax included
zł61.05 tax excl.
Module with a 4-color e-Paper display with a diagonal of 3" and a resolution of 400x168 px. It communicates via the SPI interface. Waveshare 3inch e-Paper Module (G)
Description
Module with a 4-color (red, yellow, black and white) e-Paper display with a diagonal of 3" and a resolution of 400x168 pixels. It has the ability to display content with two-level grayscale, and the built-in controller communicates via the SPI interface. Offers a wide viewing angle The e-Paper displays are characterized by high contrast of the displayed image and only consume power when the displayed content is changed. It is compatible with 3.3V systems. Support is available on the product page in the form of examples of use with Raspberry Pi, Jetson Nano, Arduino and STM32.
Features
- Diagonal: 3"
- Resolution: 400x168 px
- Display color: red, yellow, black, white
- Gray levels: 2
- Interface: 3-wire SPI, 4-wire SPI
- Pixel size: 0.176 x 0.176 mm
- Full refresh time: 12 seconds
- Power consumption: 60 mW
- Viewing angle:> 170°
- No backlight, display the last content after power off
- Low energy consumption
- Working voltage: 3.3V
- Display size: 70.4 x 29.568 mm
- Outline dimensions: 88,5 x 41 mm
Kit contains
- 3inch e-Paper Module (G)
- 20 cm 8-pin PH2.0 cable
1181391
Data sheet
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 3
- Resolution
- 400 x 168 px
- Interface
- SPI
- Touch
- No
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Arduino Uno Rev3 is a popular board with Atmel ATmega328 microcontroller from the AVR family, there are 14 I / O lines, 6 PWM channels and 6 analog inputs. The additional ATmega16U4 microcontroller realizes communication via the USB interface. Arduino A000066
zł108.57
24h
Available quantity: 82
Available
NUCLEO series starter kit equipped with STM32G474RE microcontroller (512 kB Flash, Cortex-M4), with built-in programmer-debugger ST-Link-V3E, equipped with connectors compatible with Arduino.
zł99.77
24h
Available quantity: 8
Available
The latest version of the Raspberry Pi series: Raspberry Pi 4 model B with quad-core SoC (Broadcom BCM2711, Cortex-A72) working at 1.8GHz, 1GB RAM LPDDR4, Broadcom VideoCore VI layout.
zł166.90
Delivery date unknown
No product available!
4-color e-Paper display with a diagonal of 3" and a resolution of 400x168 px. Communicates via the SPI interface. Without a PCB. Waveshare 3inch e-Paper (G)
zł59.58
Delivery date unknown
No product available!
Other products in the same category (16)
ESP32-S3 3.97" 800×480 with e-Paper display, Wi-Fi 2.4 GHz, Bluetooth 5 and 3.7 V battery supply – development board with integrated RTC, IMU, temperature and humidity sensor, and AI voice interaction support. Waveshare ESP32-S3-ePaper-3.97
zł173.09
6 weeks
No product available!
A 13.3-inch color ePaper display powered by E Ink Spectra™ 6 technology, providing excellent readability and low power consumption. The device is equipped with an ESP32-S3 processor, Wi-Fi and Bluetooth connectivity, and a built-in 5000 mAh battery that provides up to 6 months of operation on a single charge. Thanks to the SenseCraft HMI platform, it allows for quick content creation and remote updating without programming. SeeedStudio 100064156
zł1,369.33
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE001
zł356.28
4 weeks
No product available!
An educational kit with a 2.7-inch e-Paper display with a resolution of 264 x 176 pixels and four grayscale levels, ideal for presenting schedules, QR codes, and IoT messages. The device is based on a dual-core RP2350A microcontroller (2 x Arm Cortex-M33 250 MHz) with 520 KB of SRAM, 16 MB of QSPI Flash, and 8 MB of PSRAM. Connectivity is provided by a Wi-Fi and Bluetooth module (CYW43439). A built-in 1000 mAh LiPo battery, charged via USB-C, enables long, energy-efficient operation, and the RTC allows for the development of cyclic applications. Pimoroni WARE004
zł485.94
4 weeks
No product available!
Waveshare 31738 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, designed for use with an external controller via SPI interface. Waveshare 3.97inch e-Paper
zł78.55
6 weeks
No product available!
Waveshare 31063 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, equipped with a Raspberry Pi HAT+ compatible driver board and SPI interface. Waveshare 3.97inch e-Paper HAT+
zł115.85
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)
zł78.55
6 weeks
No product available!
3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)
zł115.85
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The panel is designed for use with an external driver board or controller supporting the SPI interface. Waveshare 3.5inch e-Paper (G)
zł50.33
6 weeks
No product available!
3.5" E-Ink e-paper display with a resolution of 384x184 px supporting red, yellow, black and white colors. The module includes a driver board with SPI interface and an onboard level translator allowing operation with 3.3 V and 5 V microcontrollers. Waveshare 3.5inch e-Paper Module (G)
zł81.48
6 weeks
No product available!
3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)
zł52.32
6 weeks
No product available!
3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)
zł93.58
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution and SPI interface, designed for integration with external controller circuits. Low power consumption, no backlight. Waveshare 5inch e-Paper
zł122.53
6 weeks
No product available!
5" e-Paper display with 960 x 552 px resolution, HAT driver board, SPI interface and support for Raspberry Pi and other platforms. Low power consumption, no backlight. Waveshare 5inch e-Paper HAT
zł153.39
6 weeks
No product available!
A 10.3-inch ePaper display with a resolution of 1404 x 1872 pixels, designed for presenting text and graphics with high readability. The screen supports up to 16 levels of grayscale, allowing for the display of more detailed illustrations, icons, and graphs. The display uses a TTL interface and a 40-pin FPC connector, enabling integration with systems based on the XIAO, Arduino, and MicroPython platforms. Seeed Studio 100071485
zł406.23
4 weeks
No product available!
A 10.3-inch ePaper touchscreen display with a resolution of 1404 x 1872 pixels offers a clear image with very low power consumption. Equipped with an ESP32-S3 microcontroller with 8 MB of PSRAM, Wi-Fi and Bluetooth connectivity enable easy integration with IoT systems and remote management. The device has a 3000 mAh battery for up to 6 months of operation and supports interfaces created in the SenseCraft HMI, Arduino, and PlatformIO environments. Seeed Studio 100090602
zł779.16
4 weeks
No product available!
Module with a 4-color e-Paper display with a diagonal of 3" and a resolution of 400x168 px. It communicates via the SPI interface. Waveshare 3inch e-Paper Module (G)