DC-DC Step-Up / Step-Down converter module. It has an input voltage of 6 to 35 V and an output voltage of 1 to 33 V. The current efficiency of the inverter is 0.05 to 5 A. DFRobot DFR0946

SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. Comes with a 12 V power supply

Step-Up/Step-Down converter with adjustable output voltage from 0.8 to 33 V, input voltage from 4.5 to 30 V and a maximum current of 5 A. It is equipped with a voltmeter with a display

Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 33 V with a wide input voltage range from 4 to 35 V and a maximum output current of 5 A

Step-Up converter module with adjustable output voltage in the range from 3 to 30 V with a wide input voltage range from 2 to 24 V and a maximum output current of 4 A. The board is equipped with a USB connector

Module with the Infineon Optiga SLB 9670 TPM 2.0 cryptographic chip. It uses the SPI interface for communication and is compatible with all versions of the Raspberry Pi. LetsTrust TPM

A 24 V warning lamp with red, green and yellow signaling. The device is additionally equipped with a buzzer

Integrated BME688 gas, pressure, temperature and humidity sensor in one MEMS housing. The system can be supplied with the voltage of 3.3 V and is equipped with an I2C communication interface. BME688 Breakout Board

Camera module with Sony IMX219 sensor designed for use with the NVIDIA Jetson Nano, Raspberry Pi, RDK X3, VisionFive2, etc. The camera is equipped with an 8 MPx sensor and has a 160° viewing angle. Waveshare IMX219-160IR Camera

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and Raspberry Pi Compute Module. It is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 120°. Waveshare IMX219-120 Camera

The PRT-16764 is a 20-pin extended female GPIO header, designed to expand connections on PCBs such as Raspberry Pi, Google Coral and NVIDIA Jetson. It allows you to easily connect additional modules, ensuring stable and reliable connections.

Zynq-7000 All Programmable SoC, Dual ARM Cortex-A9 MPCore, Artix-7 FPGA, 85K Logic Cells, 256KB 667MHz CSPBGA400, Xilinx

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40V and efficiently reduces it to 5V with an available output current of around 15A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. Pololu 2881

LCD TFT display with a diagonal of 2.4 "and a resolution of 320x240 pixels. Equipped with a resistive touch panel and microSD slot. Designed for use with Feather series plates. Adafruit 3315

Gravity: 360 Degree Hall Angle Sensor is a rotation angle sensor measuring a value in the range of 0-360 ° with an analogue output, powered by 5V. DFRobot SEN0221

Two-channel DC motor driver communicating via UART, SPI or I2C interface. It can control the movement of 3 to 11V motors with a maximum continuous current of 1.2A per channel. SparkFun ROB-13911

This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 3.3 V with an available output current of around 15 A. Pololu 2880

The BME280 integrated circuit is a sensor of atmospheric conditions (pressure, humidity, temperature) in the SMD casing (2.5mmx2.5mm). The sensor has very low power consumption (average 3.6uA) and has an I2C / SPI bus. The Bosch Sensortec system

32-bit microcontroller with ARM Cortex-M0 core, XMC1200, 32kB Flash, TSSOP-16, Infineon

ARK terminal connector spring 5-pin, pitch 2.5 mm, non-detachable. Set of 5 pieces