The module with a 1.9" color LCD IPS display. It has a resolution of 170x320 pixels and a ST7789V2 controller. Communication with the module is implemented via SPI interface. Waveshare 1.9inch LCD Module

Case dedicated to protect GNSS receivers against difficult field conditions. Custom slots are molded into the case to hold the Facet RTK receiver, 915MHz radio with antenna, power supply, cables and adapters. SparkFun PRT-19642

Bidirectional current sensor module based on the ACS724 circuit. It allows you to measure current in the range -50A to + 50A. It operates with a voltage of 4.5V to 5.5V and is intended for use in 5V systems. Pololu 4049

Connection plate for FPC 50-pin cables. It allows you to connect two wires and extend the connection.

Pin header goldpin black 2x40 pins. Straight connector for through-hole assembly. 2.54mm pitch

Adapter with HDMI socket to DVI plug 24+5.

E-ink display for Raspberry Pi with 2.13 "diagonal resolution and 250x122 pixels with SPI controller. DFRobot DFR0591

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

STM32G491VET6, ARM Cortex-M4 core microcontroller, 512 KB Flash, 96 KB RAM, 170 MHz CPU, LQFP100

Set of 25 momentary microswitches with white, green, red, yellow and blue caps

32-bit microcontroller from the STM32G4 family with ARM Cortex-M4 core, 128kB Flash memory, 32kB RAM memory, clock speed up to 170MHz and I2C, SPI, UART/USART, LIN, IrDA, I2S, DMA, PWM, Temp Sensor, WDT interfaces, A/D 10x12b in an LQFP32 enclosure. STMicroelectronics STM32G431KBT6

A large momentary button with a diameter of 100 mm with LED backlight. White color

An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812

Functional module for MicroMod boards. It allows you to add cellular communication to your project using the Notecard - NOTE-NBGL-500 from Blues Wireless. SparkFun WRL-20409

Kit with Facet L-Band GNSS RTK receiver and accessories. Get centimeter-level global positioning measurements with GNSS RTK. SparkFun GPS-20000

1-channel LED dimmer with a voltage range of 12 V to 48 V and a current of 20 A, enabling precise adjustment of the brightness of LED lighting

The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).

5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay.  This display comes with a driver board with HDMI, VGA, and Composite inputs and USB-enabled 40-pin to 50-pin touchscreen adapter board. Adafruit 2110