Female terminal block, 14-pin. Pitch 3.81mm. Height 11.1mm. 15EDGK-3.81-14P

32-bit microcontroller from the STM32L4 family (low power series) with ARM Cortex-M4 core, 1MB Flash memory, 320kB RAM, clock speed up to 80MHz and I2C, SPI, UART / USART interfaces, USB OTG, CAN, LIN, IrDA, I2S , DMA, Motor Control PWM, Temp Sensor, WDT, A / D 10x12b in the LQFP64 housing. STMicroelectronics STM32L496RGT6

8-wire cable, 10 cm long, with a micro 5264 female plug at one end

JST SH type connector, 1.0 mm pitch, surface mounted, horizontal spatial orientation. The set includes 10 connectors

Matrix with 16 WS2812B RGB diodes controlled by a serial signal. The module can be powered with 5V, only one signal line is required for control

270-Point Breadboard, 82x46x10mm

Angled male socket, wire-board type, for JST PH-2.0 wires, 5-pin, 2mm pitch, 100V, 2A. Set of 10 pieces

DD311, High constant current LED Driver 1A, TO-252

Ethernet network module with W5100S chip dedicated to Raspberry Pi Pico. It communicates via the SPI interface and works with 3.3 V and 5 V systems. WIZnet-Ethernet-HAT

LED-AL-50Y-D00080-60, LED 5 mm, yellow, THT

5-wire cable, 10 cm long, with a micro 5264 female plug at both ends

Momentary button, concave with a diameter of 33 mm and a height of 66 mm. Green color

The ADP0022 adapter is a practical solution for converting DC connectors in electronics projects, enabling safe and stable power connections. ADP0022

Toggle switch, two-position with a red cover and LED backlight. It can switch voltage up to 12 V and current up to 20 A

Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCU5-10CC-0050-W

The Step-Down converter module on the XL7015 chip converts the voltage in the range of 5-80V to 5-20V, with a maximum current of 0.8A and a recommended output power of 7W. It has protection against overheating, short circuit and current overload, and its board size is 16 x 44 mm.

Female terminal block, 5-pin. Pitch 3.81mm. Height 7.8mm. Suitable for 15EDGRC male strips with a pitch of 3.81 mm. 2EDGKN-3.81

Pololu 4813 is a set of two JST SH 3-pin side-entry adapters that facilitate connecting wires to breadboards and prototype circuits. Thanks to the side-entry wire insertion, the modules are suitable for projects with limited space and requiring organized cable routing.