ADXL313WACPZ-RL, 3-Axis Digital Accelerometer ±0.5 g/±1 g/±2 g/±4 g, LFCSP-32

I2C-UART converter module with two UART output interfaces. Configuration of I2C addresses allows you to connect up to 4 such modules to one controller, which means extending the board\'s capabilities by 8 UART interfaces. DFRobot DFR0627

Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637

Module with LPG gas concentration sensor (MQ-6) in the range of 200 - 10,000 ppm. The module has an analogue output and a digital output triggered by exceeding the threshold of sensitivity. modMQ-6

Module with Flash memory W25Q16 with a capacity of 16 Mbit (2 MB). It communicates via the SPI interface. Adafruit 5635

DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016

ARM Cortex-M0 CPU, Low power, 32kB Flash, 6kB SRAM, USB, 2xUSART, I2C, SPI, ADC, STM, LQFP32, RoHS

Tilt sensor module with digital output. Equipped with an XH2.54 connector

Lanberg Category 6 LSA Connector is a shielded installation component designed for fast and reliable network cable connections while maintaining high transmission performance. Its compatibility with T568A and T568B standards and S/FTP shielding make it an ideal choice for professional network installations requiring interference protection and operational reliability. It is commonly used in office networks, server rooms, and industrial facilities.

An efficient step-down converter that steps down the input voltage from as low as 45 V to a regulated output voltage range of 1.4 to 7 V, offering high efficiency and a maximum continuous current of 3.8 A. It has built-in reverse polarity, overload and short circuit protection, and the spread spectrum function reduces EMI interference. Pololu 4853

Multi-band RF frequency synthesizer with integrated VCOs, VFQFPN28, STM, RoHS

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5273

Precision Hall effect current sensor offering galvanic isolation, wide 150 kHz bandwidth and the ability to measure AC and DC current with very low power loss. With differential measurement and immunity to magnetic interference, it is perfect for applications requiring accurate current monitoring, such as power supplies, converters or motor control systems. Pololu 5290

Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 500 mA) connected to the USB socket. There is a diode on the board indicating the power connection

Flexible pressure sensor with dimensions of 40 x 40 mm. Designed to detect static and dynamic pressure at high reaction speed. DFRobot SEN0296

Step-UP converter (increasing the voltage), allows you to start with a load at a supply voltage of 0.7V, while the power consumption at rest is 5.5 uA. TPS61220