DC-DC Step-Up converter module 5V 4A U3V40F12
ID: 588697
5906623413188
zł35.85
Tax included
zł29.15 tax excl.
DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016
Description
The U3V40F12 DC-DC Step-Up converter module with an output voltage of 12 V and an input voltage from 1.3 to 12 V. The maximum instantaneous load of the module is 9.5 A, however, with prolonged use, the current above 4 A may activate the thermal protection. The converter achieves standard efficiency above 90-95% with similar values of the input and output voltage. The module has protection against overheating and too high voltage.
Pinout
- VIN - power input (1.3-12 V)
- GND - ground
- VOUT - exit
- EN - converter is turned on by default (30 kΩ pull-up resistor on the board connects EN pin with VIN). The ENABLE pin can be set low (below 0.4V) to turn off the power and put the board into a low-power state.
Features
- Input voltage: from 1.3 to 12 V (the moment of switching on requires a voltage of at least 2.7 V)
- Output voltage: 12V
- Type. maximum current: 9.5 A (momentary), 4.5 A (for a few seconds), 4 A (continuous current)
- Built-in protection against overheating, over voltage
- Type. efficiency: 90-95%
- The possibility of mounting goldpins
- Dimensions: 15.2 x 15.2 x 5.6 mm
- Weight: 1.5 g
Regulator parameters
Kit contains
- U3V40F12 converter module
- Straight 6-pin goldpin connector
- 6-pin angled goldpin connector
588697
Data sheet
- Output voltage
- 12V
- Output current
- 4A
- Converter type
- Step-up
- Supply voltage min
- 1,3 V
- Supply voltages max
- 12 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Pololu 12V Step-Up Voltage Regulator U3V50F12
zł135.15
24h
Available quantity: 2
Available
DC-AC converter, also referred to as an inverter. It converts a constant voltage (DC) of 12 V to an alternating voltage (AC) of 220 V, 380 V or 18 V
zł74.40
24h
Available quantity: 3
Available
Step-Up converter U3V70F15 with an output voltage of 15 V, an input voltage from 2.9 to 15 V and a maximum output current of 10 A. Pololu 2896
zł89.75
4 weeks
No product available!
Step-Up converter U3V70A with an output voltage from 4.5 to 20 V, an input voltage from 2.9 to VOUT and a maximum output current of 10 A. Pololu 2890
zł112.24
4 weeks
No product available!
A small DC - DC boost module that converts a 0.9..5V power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. It integrates a PFM DC-DC boost control chip. FIT0471
zł19.75
24h
Available quantity: 3
Available
Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940
zł25.10
24h
Available quantity: 5
Available
Step DC-DC converter, Uwe 3.5-30 V, adjustable 4-30 V, RoHS
zł6.90
4 weeks
No product available!
Step-up DC-DC converter module, 0.9-5V input voltage, 5V output voltage (max. 500 mA) connected to the USB socket. There is a diode on the board indicating the power connection
zł3.83
24h
Available quantity: 6
Available
Step-Up converter U3V70F6 with an output voltage of 6 V, an input voltage from 2.9 to 6 V and a maximum output current of 10 A. Pololu 2892
zł78.97
24h
Available quantity: 2
Available
This powerful boost regulator efficiently boosts input voltages as low as 2.9 V to a higher, adjustable output voltage between 9 V and 30 V while allowing an input current as high as 5 A.
zł154.87
4 weeks
No product available!
Pololu 24V Step-Up Voltage Regulator U3V50F24
zł122.18
24h
Available quantity: 2
Available
DC-DC Step-up converter module based on the U3V70F5 system. Input voltage 2.9 ... 5V, output voltage 5V, maximum current 10A. Two mounting holes. Polol 2891
zł82.90
24h
Available quantity: 3
Available
The Step-Up NCP1402 Buck Voltage Regulator module with output voltage 3.3V, input voltage range of 0.8-3.3V and a maximum output current of 200 mA. Pololu 2114
zł38.47
24h
Available quantity: 2
Available
DC-DC Step-Up converter U3V40F6 with an output voltage of 6 V, an input voltage of 1.3 to 6 V and a maximum output current of 4 A. Pololu 4013
zł39.15
24h
Available quantity: 3
Available
Step-Up converter with an output voltage of 2 to 28 V, an input voltage of 2 to 24 V and a maximum current of 2 A
zł3.31
4 weeks
No product available!
DC-DC Step-up converter module based on the U3V70F9 system. Input voltage 2.9-9V, output voltage 9V, maximum current 10A. Two mounting holes. Polol 2894
zł86.63
24h
Available quantity: 2
Available
DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016