Finder 34.51.7.005.001 is a miniature SPDT relay powered by 5 V DC, designed for switching loads in automation systems. It handles current up to 6 A at 250 VAC, making it a versatile solution for medium-duty devices.

Digital camera based on OV7670, 0.3 Megapixel. OV7670 Camera Board  

A glass fuse with dimensions of 5x20mm and a current of 8A is a fast-reacting protection of electronic devices against overload, supplied in a set of 100 pieces

Stereo audio amplifier with a power of 40 W (2 x 20 W) powered with the voltage of 12 V. Equipped with an audio input in the form of two chinch sockets and an audio jack 3.5 mm input

HDMI cable compliant with the HDMI High Speed with Ethernet specification, allows you transmit a 4k resolution image at 30 Hz, 1m cable length. LANBERG

LED-AL-50U-W00140 emits UV radiation with a wavelength of 402 nm at a narrow 15° angle, providing high intensity in the illumination area. Thanks to its small 5 mm package, it is used in measurement, inspection, and decorative systems.

Module with rain sensor. It allows you to detect precipitation using the analog output

The module with an alcohol sensor (MQ-3), allows you to measure the concentration of ethanol in the air. The module has an analogue output and an output triggered by exceeding the threshold of sensitivity.

The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M

A set of XT120 connectors (male plug and female socket with covers) with a maximum forward current of 60 A. It will work as a battery connector or a power connector in RC models. Amass XT120

Single operational amplifier with ultra low power consumption in the SOT23-5 housing. STMicroelectronics TSU101ILT

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-0050-S

STEMMA QT/Qwiic cable (adapter) for Grove 100 mm long. It enables interoperability between the I2C SparkFun Qwiic and Adafruit STEMMA QT-based system and Seeed Studio\'s Grove boards. Adafruit 4528

Module with electromechanical relay. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 3 A or a voltage of 30 V DC and a current of 3 A

IDC 2.54 mm 16P plug dedicated to creating permanent signal connections in electronic systems, prototypes and automation systems. Standard pin spacing ensures easy integration with a wide range of devices. conIDC-16P-A

3-meter USB 2.0 cable with USB A and USB B plugs, used to transmit data between devices, often used to connect printers and scanners to computers. Akyga AK-USB-12

Module with 7 RGB LEDs WS2812 type controlled by serial signal. It can be powered by 5V, only one signal line is required for control

BOB-12009

2-pin ARK mounting strip, 5.0 mm pitch. 300-5.0-02P-12-00A(H). Set of 10 pieces