Open source USB dongle that allows you to work with the LoRa network. It allows you to communicate with a range of up to 5 km and has a built-in 1.14-inch LCD display. SB Components 23011

USB Type C to USB Micro-B cable working in the USB 3.1 standard. Dedicated to Saleae Logic Pro 8 and Logic Pro 16 logic analyzers. Saleae SAL-00164

The module with 4 relays is designed for the M5Stack sets. It allows you to control devices with an operating voltage of up to 250 V AC and a current of up to 10 A or a voltage of 28 V DC and a current of 10 A. M5Stack U097

AVR, 16kB Flash, 1kB SRAM, 512B EEPROM, ADC, UART, 16MHz, TQFP44, RoHS

The adapter allows you to convert the micro USB port into a USB type A socket. This allows you to connect devices such as external drives, memory cards or USB adapters to smartphones and tablets with OTG function. The OTG function allows direct data exchange between mobile devices and USB without the need to connect to a computer. Akyga AK-AD-08

Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °

Blue LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection class IP65 (waterproof)

32-bit MCU for automotive applications, Power Architecture (e200z0h), 1024 kB Flash, LQFP100, STM, RoHS

Green LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 120 LEDs/m. Protection level IP21

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi, RoHS

Red LED strip with SMD 5050 diodes. It is powered by 12 V DC, has a length of 5 m and 60 LEDs/m. Protection level IP21

Bluetooth audio receiver module with microphone in set with 3.5 mm Jack adapter. It enables wireless transmission of sounds. It is equipped with a 3.5 mm audio jack, microUSB socket and a control button

The adapter allows you to connect devices with a DVI 24+5 port to those with an HDMI input. It is ideal for connecting your computer\'s graphics card to a TV or projector. Made in the DVI-I DUAL-link standard, it guarantees the transmission of digital signals without their compression, ensuring the highest image and sound quality. Data transfer in this adapter can take place in two directions. Akyga AK-AD-03

The 6-55V 200W Step-Up Converter Module is a device that converts a DC input voltage (6-35V) to a higher DC output voltage (6-55V) with a maximum input power of 200W, a maximum input current of 10A and a maximum output current of 7A. It offers a high conversion efficiency of up to 97.6% and it is recommended to keep a margin when operating for long periods to avoid overheating.

Ethernet MQTT communication module designed for M5Stack sets. It communicates via the UART interface using AT commands. M5Stack U129

Adapter with two D-SUB 15-pin female ends, allowing you to change the VGA cable end from male to female or connect two male VGA cables. Finished aesthetically in silver with yellow accents, has nickel-plated plugs and is adapted to work in the temperature range of 5-50 ° C. Akyga AK-AD-18

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716