A module with six GNSS antennas designed to test various solutions within the framework of GPS, GLONASS, Galileo or BeiDou geolocation systems. SparkFun GPS-15247

Stepper motor driver based on TB67S249FTG. It allows you to control a stepper motor with voltage from 10 to 47V, with a maximum current of 1.8A. The controller can be controlled using: USB, Serial TTL, I2C, RC (PWM modeling), analog input or quadrature encoder. Pololu 3138

TFT LCD display with a diagonal of 3.5" and a resolution of 480x320 pixels. Equipped with a resistive touch panel and a microSD slot. Intended for use with Feather series boards. Adafruit 3651

Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px, equipped with a microSD slot. Communication via the SPI interface. SparkFun LCD-15143

The module with a heart rate sensor and the SpO2 level dedicated to micro:bit. It is based on the MAX30102 chip and communicates via the I2C interface. SparkFun SEN-15271

Flat USB cable A - micro-B USB with a length of 1 m, cable in a dark pink color

Conductive ITO coated glass. It has dimensions of 100x100 mm, a thickness of 1.1 mm and a resistance of 10 Ω/inch2

DFRobot BLE4.1 Module is a Bluetooth 4.1 module with DA14681 processor with 3.3 V power supply. It is characterized by low energy consumption and advanced energy management system (built-in charging module). DFRobot TEL0120

Universal silicone cover that protects the LED strip against moisture, water and dirt. Provides protection in accordance with the IP67 standard

Data logger programmed to automatically record data from GPS and Qwiic series sensors. SparkFun DEV-19426

GPS module with 72-channel GNSS ZOE-M8Q receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART and I2C interfaces. SparkFun GPS-15193

Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922

GPS module with 72-channel GNSS SAM-M8Q receiver. The system can receive data from all major positioning systems: GPS, GLONASS, Galileo and BeiDou. It has UART and I2C interfaces. SparkFun GPS-15210

Audio module with Jack (TRS) connector and THAT 1206 balanced line receiver. Offers low distortion and high attenuation. SparkFun BOB-14002

Module with digital temperature sensor TMP102. It enables temperature measurement in the range from –40°C to 125°C with an accuracy of 0.5°C. The system communicates via the I2C interface. SparkFun SEN-16304

Module with the MCP9600 amplifier designed to work with a K-type thermocouple. The module has a screw connector for connecting this type of thermocouple. I2C communication. SparkFun SEN-16295

4-digit, 8-segment LED display module with 8-level brightness adjustment. Communication via the I2C interface. DFRobot DFR0645-R

This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 18 A without a heat sink.

RGB LED strip driver module dedicated to Arduino boards. It can work with tapes with a supply voltage of up to 12 V and a current consumption of up to 3 A. DFRobot DFR0274

Development kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435