LCD display module, with IPS screen, 1.69 inch diagonal, 240 x 280 resolution, with built-in controller, communication is via SPI interface.

IR distance sensor with a range of up to 400 cm. It has a digital output that changes its state when the sensor detects an object. DFRobot SEN0531

10-pin WF10S plug straight 2.54 thick, tin-plated. Set of 10 pieces

CAN module based on the SN65HVD230 system, allows you to connect a microcontroller with a CAN bus interface

2-channel brush motor controller module with PWM signal mixing function. It allows you to control two DC motors with a current consumption of up to 5 A per channel

32-bit MCU, built on the embedded Power Architecture, 4MB Flash, 192 KB SRAM, 3xeSCI, 3xCAN, 3xSPI, ADC, LQFP176, STM, RoHS

Surface-mounted IT socket with an unshielded RJ-45 category 6 port, designed for high speed IT networks, offers IDC/LSA connectors, supports 26-22 AWG cables and is characterized by simple installation. Lanberg OU6-0001-W

Air530Z GPS module with external antenna. The board is equipped with a Grove connector and communicates via the UART interface. Seeed Studio 109020022

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Yellow color

The multi-voltage zener diode kit is a versatile component kit for voltage regulation, surge protection, and other electronic design and repair applications

Camera module with IMX519 sensor dedicated to Raspberry Pi minicomputers. It uses a 16 MP matrix and allows you to record video in resolutions of 1080p@30fps. ArduCAM B0371

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Orange color

El-wire is a thin and flexible wire which shines under high voltage. The cord is yellow, has a diameter of 3mm and a length of 3 meters

The module protects the load against reverse polarity to -60 V, but does not block reverse current, which is desirable in applications such as motor control. It uses the LM74500-Q1 controller and a MOSFET transistor. Thanks to its low impedance (1.5 mΩ), it supports currents up to 25 A continuous and 50 A transient, providing reliable protection and the possibility of easy assembly. Pololu 5387

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °

10-pin connection cable with a length of 20 cm, terminated with a male goldpin plug and alligator connectors

Single-channel SuperSpeed USB 3.0 driver from NXP in the X2QFN12 housing. The 1.8V system supports data rates up to 5 Gbit / s. NXP PTN36221AHXHP

Knob with an inner diameter of 6 mm for mounting on a rotary potentiometer. Beige color