The SW-RLSM102A3 Subminiature Key Switch is a compact, single-pole, ON-ON toggle switch designed for angle mounting, making it easy to place in devices with limited space. It meets RoHS standards, ensuring eco-friendliness and safe use in various electronic applications.

External waterproof LPWA antenna dedicated to communication in LoRa networks in the 433 MHz frequency band. It is mounted using the magnet built into the cradle. Waveshare 433/470M Magnet Mount Antenna

4-channel converter of voltage levels 3.3V/5V that allows you to connect systems operating at a lower voltage to those powered by a higher voltage

The PT4110E89E is an advanced step-up LED driver designed to power white LEDs in applications requiring stable current and high energy efficiency. It provides an output current of up to 1.5A at a supply voltage of up to 5.5V, making it an ideal solution for low input voltage LED lighting

Female connector MOLEX 90142-0006 from the C-Grid III series, designed for wire-to-board connections, offers six contact positions in a dual-row 2x3 layout with a 2.54 mm pitch. Mounted on a wire and supplied without contacts, it allows flexible adaptation to project requirements. It is used in consumer electronics, automation, and embedded systems where compact and reliable connections are essential.

Red plastic cap for the monostable button (Tact Switch). Fits switches with dimensions 12x12x7.3 mm

KAmod Si7021 is a compact module with a digital temperature and humidity sensor, operated via the I2C interface, dedicated to environmental applications. Qwire connectors and the traditional 2.54 mm pitch provide easy integration with various hardware platforms.

KAmodMPL3115A2 is a module with an atmospheric pressure sensor MPL3115A2 from NXP. Sensor allows to make a measurement in the range of 200...1100hPa (20...110kPa). Communication with the sensor is realized via the I2C interface. The board is equipped with the Pmod I2C standard connector and the KAMAMI connector. Kamami KAmodMPL3115A2

KAmod RS232S-ALL is a 3-5.5V RS232 to TTL converter supporting all RS232 signals, offering standard DB9 and Phoenix MC 3.81 connectors and 2.54mm goldpins, based on the MAX3238/SP3238 and providing ESD protection up to 15kV

KAmod I2C Hub8 enables splitting the I2C bus into eight independent channels with a voltage translation function, which allows effective integration of multiple devices with repeating addresses. The module is recommended for advanced microprocessor projects with bus separation requirements and diverse voltage levels.

MIC5504-1.8YM5, LDO Voltage Regulators 1,8V 300mA, SOT23-5

The DC-DC Step-down Converter Module with the LM2596S chip allows you to convert the voltage from the range of 3-40 V to a regulated output voltage of 1.5-35 V with high efficiency up to 92%. The maximum output current is 3 A, and the operating frequency is 150 kHz. The compact design with dimensions of 43 × 21 × 14 mm, the possibility of precise voltage regulation and a pinout of 2.54 mm facilitate the integration of the module in DIY projects, power supply systems, modeling and laboratory stations. The operating temperature range is from -40 to 85°C. KamamiLabs KAmod LM2596S

KAmod I2C Hub4 enables splitting the I2C bus into four independent outputs with a voltage level translation function, eliminating address conflicts and increasing connection flexibility. The module is intended for projects with multiple I2C devices requiring separation or diverse supply voltages.

5 mm Green Diffused LED, 60 degree angle; light intensity 80 mcd (20mA) (2.25V); df 568nm

MicroHDMI - HDMI cable in black color, 1 m long. Intended for use with Raspberry Pi 4 model B and Raspberry Pi 5

2-core cable, 20 cm long, with JST XH plug (2.50 mm pitch). The ends of the wires are isolated and tinned

Flexible fixing clip Button fixin column M.2 SSD (CKX13816) designed to stabilize M.2 SSDs on motherboards and adapter boards. Made of durable, flexible plastic, it allows quick, tool-free installation. Provides secure retention of M.2 drives in 2230, 2242, 2260, and 2280 form factors. Ideal for service applications, DIY projects, and computer system assembly where ease of use and reliable mounting are essential.

The KAmod USB-Micro Adapter Module allows for the connection of a Micro-USB port to almost any electronic system. All necessary signals are available on the pin header, including 5V power, D+ and D- data lines, and an additional ID signal.