Category: ELECTRONICS

KAmodDIGIpot is a miniature digital potentiometer module. It allows, by means of two PU / PD inputs, to change the resistance value between the outputs A, W, B (compatible with the outputs of the analog potentiometer), using buttons or outputs of the microcontroller. Adjustment in 32 steps, value 10k.

Pin header goldpin yellow 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.

Adapter DFN10 to DIP10 in the form of a PCB. It can be used as an adapter for a programmer, breadboards or prototype structures

Module with digital thermal sensor, thermostat and I2C interface

L7805ABV, Linear voltage regulator 5V 1.5A, TO-220

Easy-to-use retractable cable with USB type A plugs and micro-B type, the cable has a length of 73 cm

Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V

Red plastic cap for the monostable button (Tact Switch). Fits switches with dimensions 12x12x7.3 mm

Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board

Module with AT42QT1060 controller - contectless keyboard controller, Kamami, RoHS.

Step-Down XL4015 converter module with adjustable output voltage in the range from 1.25 to 36 V with a wide input voltage range from 4 to 38 V and a maximum output current of 5 A

KAmodLSM6DS3 is a module that allows measurement of acceleration and angular velocity values. It has a built-in voltage stabilizer and level translators on SDA / SCL lines, thanks to which it can be used in 2.5-5.5V voltage systems

XL6009E1 Step-Up converter with an output voltage of 1.23 to 30 V, an input voltage of 4 to 35 V and a maximum current of up to 3 A

Momentary button, monostable (Tact Switch), dimensions 12x12 mm and 7.3 mm high, yellow, with 4-pins

KAmod DMX512 is a DMX signal converter that enables communication between a computer and a stage lighting system. It is equipped with full galvanic isolation, supports up to 512 devices, has a transmission range of 1200 m, is powered via a USB-C port, and is compatible with various programs, making it ideal for professional use in theaters, clubs, and concerts

HEX type inverter with Schmitt trigger inputs. It has 6 channels. Case SO14 (SMD).