KAmod Motor Driver TB6612FNG - Dual DC Motor Driver
ID: 1197804
5902186308664
zł18.91
Tax included
zł15.37 tax excl.
The dual-channel KAmod Motor Driver TB6612FNG with MOSFET H-bridges enables precise control of DC and stepper motors with PWM frequency up to 100 kHz. The compact design, wide voltage range, and protections make the module suitable for mobile projects, robotics, and automation.
Description
The KAmod Motor Driver TB6612FNG module, built on the Toshiba TB6612FNG chip, enables independent control of two DC motors or one stepper motor within a supply voltage range of 4.5 to 13.5 V. Logic circuits require a voltage of 2.7–5.5 V. Each H-bridge channel based on MOSFET transistors can provide up to 1.2 A of continuous current and up to 3.2 A of peak current. It is possible to combine channels to achieve higher current capacity up to 2 A.
The driver supports PWM modulation up to 100 kHz and offers STANDBY mode, thermal shutdown protection (TSD), and undervoltage lockout (UVLO). The module is equipped with LEDs indicating the presence of voltage as well as built-in filtering capacitors ensuring stable system operation. 2.54 mm pitch connectors and 20.32 mm spacing allow convenient connection to breadboards and prototyping systems.
Properties
- Motor voltage (VM): 4.5 - 13.5 V
- Logic voltage (VCC): 2.7 - 5.5 V
- Continuous output current: 1.2 A per channel
- Peak output current: 3.2 A per channel
- Maximum PWM frequency: 100 kHz
- STANDBY mode
- Built-in thermal shutdown circuit (TSD)
- Undervoltage lockout (UVLO)
- Built-in filtering capacitors on motor (VM) and logic (VCC) supply lines
- LEDs indicating voltage presence on VM and VCC lines
- Connector spacing: 20.32 mm (0.8")
- Connector pitch: 2.54 mm (0.1")
- PCB dimensions: 22.86 x 25.4 mm
Set includes
- Assembled and tested module
- 2 × straight 8-pin goldpin header, 2.54 mm pitch
1197804
Data sheet
- Output current
- 1,2 A
- Number of channels
- 2
- Supply voltage min
- 4,5 V
- Supply voltages max
- 13,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł76.48
24h
Available quantity: 2
Available
Module with the HR1124S DC motor controller with a maximum current of 1.2 A. It can be powered with the voltage from 1.8 V to 6.8 V and is controlled by two PWM signals
zł10.15
24h
Available quantity: 4
Available
DC motor driver that allows you to control the movement of three drives using the I2C interface. The set includes only the board without connectors. Pololu 5032
zł177.08
4 weeks
No product available!
DC motor driver with voltage 4.5..28V and maximum continuous current of 2.6A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3143
zł232.62
4 weeks
No product available!
Dual motor controller allowing two DC motors to be driven with voltages from 4.5 to 13.5V and a continuous current of 1.2 A per channel. SparkFun ROB-14450
zł81.77
24h
Available quantity: 1
Available
2x1.2A DC Motor Driver is a dual controller of DC motors powered with 2.5 ... 12V voltage with a maximum current consumption of 1.2A (3.2A peak) per channel. DFRobot DRI0044
zł20.82
24h
Available quantity: 6
Available
Pololu Dual G2 High-Power Motor Driver 18v22 is an extension that allows you to control two DC motors designed for Raspberry Pi. The motors can be powered with 6.5-30V and draw up a maximum current of 22A. Pololu 3754
zł605.05
4 weeks
No product available!
Motor-driven expansion board for Arduino, L293D, 74HC595 shift register, RoHS
zł9.45
24h
Available quantity: 10
Available
Available
TB6612FNG Dual Motor Driver Carrier
zł20.90
24h
Available quantity: 22
Available
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
Direct current motor driver (DC) with a working voltage from 5 to 30 V and a maximum continuous current of 30 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MD30C
zł138.34
4 weeks
No product available!
The ESC RC controller module is designed for brush motors with a supply voltage from 3.5 to 6 V and a capacity of 1 A
zł6.01
24h
Available quantity: 10
Available
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board without connectors. Pololu 5050
zł305.08
4 weeks
No product available!
Two-channel driver of direct current (DC) motors with an operating voltage from 5 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD10A
zł93.28
24h
Available quantity: 11
Available
The dual-channel KAmod Motor Driver TB6612FNG with MOSFET H-bridges enables precise control of DC and stepper motors with PWM frequency up to 100 kHz. The compact design, wide voltage range, and protections make the module suitable for mobile projects, robotics, and automation.