Module with EEPROM 24LC32 memory with a capacity of 32 kBit (4 kB). Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5146

USB A-microB USB cable with a length of 1m, white-blue cable, flat, blue plugs illuminated with RGB diode

A sheet of rubber with dimensions of 200x200 mm, changing its resistance during stretching. Adafruit 5463

SMT Breakout PCB for 48-QFN or 48-TQFP - 3 Pack!

KAmodQTR8A is a module with eight photointerrupter sensors KTIR0711S. It allows to detect edge or line. Thanks to the analog outputs, is possible to connect a module to the e.g. comparator. The module can be used in analisze of the floor e.g. by Linefollower vehicles.

Module with a temperature and humidity sensor based on the HTU31 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4832

Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811

Module with a 3-axis BMA400 accelerometer with a measuring range up to ± 16g. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020582

Class D mono audio amplifier module with MAX98357 chip. It can work with a 4 to 8 Ω loudspeaker with a power of up to 3 W and communicates via the I2S interface. modMAX98357

Plate allowing a   connect the wires with goldpins to a maximum of 50- conductor , 0.5 mm FPC tape . Adafruit 1492

5 mm green LED. Set of 10 pieces

The 3RV2901-1E cross-mount auxiliary switch is a reliable component that extends the functionality of Siemens motor starter protectors by enabling the addition of additional auxiliary circuits via cross-mounting. Equipped with 2 NO and 2 NC contacts, it offers flexibility in various configurations for controlling and monitoring the status of the circuit breakers.

7-segment LED display, 1 digit 30.60mm, black background green (575nm), 20mcd (10mA), common anode, red (630nm), 20mcd (10mA), common anode. Pb-free. LED1-AS-B-12011BMRMG

The ACS72981 current sensor module uses the Hall effect to accurately and safely measure AC and DC current, providing electrical isolation of the current path. With a wideband analog output (up to 250 kHz) and low conduction resistance (0.2 mΩ), it minimizes energy loss and offers a fast response time of less than 2 µs. Pololu 5250

Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599

Driver enabling operation of displays with an RGB-666 connector with resolutions from 480x272 to 800x600 pixels. Equipped with an ESP32-S3 microcontroller with 16 MB Flash memory and 8 MB PSRAM memory. Powered and programmable via USB Type-C connector. Adafruit 5800

Module with digital barometer BMP388. It measures pressure in the range from 300 to 1250 hPa and communicates via I2C or SPI. Adafruit 3966

Module with a GPS receiver based on the MTK3333 chip. It is equipped with a STEMMA QT connector and communicates via the UART or I2C interface. Adafruit 4415