Camera set with OV5647 5 MPx sensor, allows you to rotate the camera, control the angle of inclination and zoom. Works with Raspberry Pi. Swivel base included. ArduCAM B0167B5

A synchronous step-down converter that reduces input voltage from 18V to 60V to a stable 18V with up to 95% efficiency and 4A output current. It offers low standby current (<0.2mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5578

GNSS receiver breakout based on the L86-M33, supporting GPS, GLONASS and Galileo with an integrated ceramic antenna and a connector for an external antenna. It offers positioning accuracy of approximately ±2.5m, update rates up to 10Hz, UART communication, PPS output and EASY, AlwaysLocate and LOCUS functions. Soldered 333201

A step-down converter that reduces the input voltage from 6V to 60V to a stable 6V with up to 95% efficiency and 5.5A output current. It offers low standby current (<0.2mA), soft-start, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5573

5 MP camera module with OV5647 sensor for Raspberry Pi boards with CSI connector (e.g. Raspberry Pi 5, 4B, 3B+, 3B, 2B, 1B+, Zero, Zero 2W), fixed focus 3.4 mm, 66° field of view, MIPI CSI-2 interface, 1080p video. Waveshare RPi Camera (D)

Finder 26.01.8.230.0000 is an impulse relay with a single NO contact, designed for installation in mounting boxes. It enables the control of circuits with a maximum current of 10 A at a voltage of up to 250 V AC. The relay coil is powered by 230 V AC, making it suitable for use in standard electrical installations.

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 5.5x1.7 mm DC plug

A miniature lidar distance sensor that detects objects up to 5 cm away, regardless of color, transparency, or lighting. It generates a digital signal (0 V on detection), operates in the 3-5.5 V range, draws only 30 mA, and supports sleep mode via the ENABLE pin. Ideal for robotics, automation, and contactless interfaces, it offers a fast response time (142 Hz), switching hysteresis, and a compact housing with an indicator LED. Pololu 5550

A synchronous step-down converter that reduces input voltage from 3.5 to 60 V to a stable 3.3 V with up to 95% efficiency and up to 6 A output current. It offers low standby current (<0.2 mA), soft-start functionality, overcurrent, thermal, and reverse polarity protection. Compact and easy to integrate, it is ideal for microprocessor systems, IoT, and automation. Pololu 5570

Adapter with built-in Power Delivery (PD) trigger. It has a USB type C socket and a 2.5x0.7 mm DC plug. Maximum power up to 100 W

Module with 5 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4205

Shield for STM32 Nucleo that allows you to add the possibility of operating a three-phase brushless motor (BLDC) or synchronous permanent magnet (PMSM). It uses the L6230 chip for control. X-NUCLEO-IHM07M1

Red laser diode module with 5mW power, displaying intersecting lines. Ideally suited to the construction of the laser level, and thanks to the built-in driver, it is possible to power 3 - 5V. LD-G650A03 - Cross

Pololu 5278 Large Carrier current sensor based on the ACS72981KLRATR-150B5 chip, designed for bidirectional current measurement from -150 A to +150 A with 5 V supply voltage in applications requiring galvanic isolation and an analog output signal. Pololu 5278

Crowtail – 3-Axis Digital Accelerometer (±16g) is a digital MEMS accelerometer with a wide measurement range and high sensitivity, based on the ADXL345 chip. Intended for projects requiring motion, orientation, and acceleration detection in robotics, safety systems, and interactive devices.

An adapter for signal analysis during data transfer to a microSD card. The adapter allows you to connect a signal analyzer or other device in parallel to the system working with a microSD card. SparkFun TOL-09419

32-bit ARM Cortex-M0 MCU, 32KB Flash, 4KB SRAM, LQFP64, RoHS