An expansion board for the BBC micro:bit, allowing easy connection and control of low-power servos. It supports two servos by default, and up to three by disabling the built-in ZIP LEDs. Powered by three AAA batteries, it simultaneously supplies power to the micro:bit, while a power switch protects against unnecessary discharge. With five RGB ZIP LEDs and the ability to connect additional ones, the board allows for attractive lighting effects and is ideal for robotic projects like the :MOVE mini. Kitronik 5623

Laser ToF distance sensor based on the VL53L1X, providing distance measurements up to 4 m at a ranging frequency of up to 50 Hz. Equipped with a Class 1 940 nm infrared emitter and SPAD receiver, it communicates via the I2C interface. The module operates from a 3.3 V to 5 V supply and comes with a pre-installed 200 mm GH4P cable. Designed for use with the Pixhawk 4 flight controller. Holybro ST VL53L1X Lidar

Module with 15 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4215

A module with a high precision temperature sensor based on the STS35 system. It allows measurement with an accuracy of ±0.1° C and communicates via the I2C interface. DFRobot SEN0434

32-bit ARM Cortex-M3, 512 kB Flash, 96 kB SRAM, 4 kB EEPROM, USB Device/Host/OTG, 5xUART, Ethernet, LCD, EMC, TFBGA180, NXP, RoHS

Energy-saving environmental sensor, enabling precise measurement of temperature in the range from -40℃ to +85℃ and atmospheric pressure from 300 to 1100 hPa. Supports I2C and SPI interfaces, and thanks to the FIFO function allows to minimize energy consumption - even to 0.5 μA in standby mode. Compatible with Arduino, Raspberry Pi and Micro:bit, it is ideal for use in DIY projects, educational projects and weather stations. Seeed Studio 110992164

An acrylic diffuser for the Pico 2W Unicorn Galactic board, which effectively softens and disperses the intense light from LEDs. The translucent layer makes the pixels larger, blurrier, and much easier on the eyes, improving comfort during long-term use. The set is ideal for desktop installations, wall mounts, and decorative projects. Pimoroni PIM713

Lanberg 4K HDMI Cables (version 2.0, High Speed with Ethernet) are the perfect solution for audiovisual transmission between multimedia devices such as computers, monitors, televisions, NAS devices, laptops, projectors, and gaming consoles. The cable ensures very high-quality image and sound transmission, as well as efficient performance. CA-HDMI-20CU-0075-BK

7.5inch e-Paper (H) is a four-color e-paper display with a resolution of 800×480, designed for low-power outdoor and indoor applications. Controlled via SPI interface, it provides excellent readability under all lighting conditions and requires no power to maintain the displayed image.

The Waveshare 0.71-inch LCD module 29380 with a round, full-color IPS screen and SPI interface is a compact solution for displaying information in microcontroller-based projects. With its small size, high image quality, and easy integration, it is well-suited for wearable systems, robotics, interactive gadgets, and modern HMI devices.

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18425

Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 1.2 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-3AMOTOR

A 24 GHz FMCW radar with Wi-Fi 802.11b/g/n and Bluetooth 5.0 BLE support, enabling precise detection of motion and human presence. Equipped with an integrated detection algorithm and a RISC processor with SPI, UART, I²C, PWM, and GPIO interfaces, it provides flexible configuration and reliable communication in IoT systems. With a wide operating temperature range (-40°C to +85°C), a built-in radar antenna, and WPA3 support, the module is ideal for smart homes, building automation, and security systems.

Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244

Module with BME280 environmental sensor. It allows you to measure temperature, humidity and pressure. The sensor is equipped with two communication interfaces: SPI and I2C. SparkFun SEN-13905

Digital night vision allows you to observe and record in complete darkness, with a maximum video resolution of 4K and photos up to 36MP. The device offers a range of up to 300 meters in night mode, 6x digital zoom, and a 3-inch IPS screen with adjustable brightness. Thanks to its robust construction, IPX6 water resistance rating, and 32GB of built-in memory, it is ideal for outdoor activities – from hunting to wildlife observation and conservation work. Fnirsi NVS-40

BME688, 4-in-1 air quality sensors, gas, humidity, pressure and temperature sensor, LGA-8

Adafruit 603 - Stainless Thin Conductive Yarn / Thick Conductive Thread - 35 ft

Lanberg Cat. 6A patch cord with Fluke Passed certification guarantees the highest quality and reliability, enabling optimal network connection compatible with various network devices in any environment. Lanberg PCF6A-10CC-0100-W