Board with the NB-IoT SIM7020E module designed for the Raspberry Pi Pico. It communicates via the UART interface and AT commands. Waveshare Pico-SIM7020E-NB-IoT

Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px. Communication via SPI interface. Waveshare Pico-LCD-1.8

Module with a digital rotary encoder controlled by the I2C interface. The potentiometer has RGB LED backlight. The encoder generates post-movement information with 24 levels per revolution and rotation direction detection. SparkFun DEV-15083

Samsung 980 SSD 250 GB. It is equipped with NVMe PCIe 3.0 x4 interface with M.2 M Key connector. Samsung MZ-V8V250BW

32-bit STM32F7 microcontroller with ARM Cortex-M7 core, 1MB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.71 ... 3.6 V, 100LQFP, STM, RoHS

Adafruit 519 - Conductive Rubber Cord Stretch Sensor + extras!

Digital Distance Sensor 0.5 - 5cm, Sharp, RoHS

Antenna with an SMA male connector working in the 433 MHz frequency band. It has a right angle joint

MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC, detects motion, tilt and basic orientation, wide usage range: from +-2g up to +-8g, easy to use with Arduino or another microcontroller. Adafruit 2019.

2.4 "TFT LCD touch screen with 320x240 pixel resolution, ILI9341 display controller (SPI interface). The module is additionally equipped with a micro-SD card slot. Adafruit 2478

This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 7.5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors.

STSPIN220 stepper motor driver module with a low voltage range of 1.8 ... 10V and 1.1A working current. The controller allows you to control the motor motion up to 9 different resolutions (up to 1/256 steps). Pololu 2876

Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1

Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435

Energy-saving Wi-Fi and Bluetooth 5.0 module compliant with the IEEE 802.11 a/b/g/n/ac standard. Ampak AP6256

INEMO system: 3D accelerometer and 3D gyroscope in LGA14L housing by STMicroelectronics

The Winstar WEH001602ABPP5N00100 OLED display is a character display with dimensions of 80×36×10 mm, capable of displaying 16 characters on 2 lines. It comes with a built-in WS0010-TX controller and operates within a power supply voltage range of 4.8–5.3 V and temperature range of -40°C to 80°C, offering excellent readability thanks to OLED technology.

Vibration sensor module with sensitivity adjustment. modVIBRATION_DET

Set with HQ camera, USB cable, lens and tripod. Compatible with UVC, works with Raspberry Pi, Android devices and PC. ArduCAM B0288