NanoBeacon Board - Beacon module with IN100
ID: 1184113
5906623495764
zł28.89
Tax included
zł23.49 tax excl.
Compact, low-power 2.4 GHz Bluetooth Beacon solution, ideal for sensor monitoring, asset tracking and real-time location. With extremely low power consumption, it can operate for years on a 3V button cell battery, making it an efficient choice for IoT applications. Module configuration is simple and intuitive thanks to the InPlay NanoBeacon Config Tool, which enables easy programming without the need to write code, offering a user-friendly graphical interface to set device parameters. Version with connectors and without LED and button, intended for direct use in the target application. SparkFun WRL-21327
Description
IN100 NanoBeacon Module is a compact, energy-efficient Bluetooth beacon module operating in the 2.4 GHz band. With exceptionally low power consumption, it is ideal for applications such as sensor monitoring, asset tracking, or real-time location systems. The module is based on the IN100 NanoBeacon™ chip from InPlay™ and supports standard 2.4 GHz protocols. It includes numerous built-in features that significantly reduce power usage, allowing it to operate for years even with continuous device connectivity. The Pro version comes with soldered 2.54 mm headers but excludes a power LED and button, making it ready for direct integration into the target application.
The IN100 module can be powered by a 3V button cell battery (CR1225), for which it includes a compatible 12 mm battery holder (battery not included). Additionally, the module features a Qwiic connector for seamless integration with the Qwiic ecosystem, simplifying connections to other modules and sensors. One side of the board provides a UART interface via a 6-pin 2.54 mm header for serial communication, while the other side includes four GPIO pins (4-7) and two power switch pins (SW0 and SW1). The back of the board offers a "Notes" area, allowing users to add custom labels or identifiers to distinguish between different NanoBeacon modules.
The Pro version is equipped with soldered 2.54 mm headers and is optimized for direct application use, with no power LED or button installed. Configuring the module is straightforward with the InPlay NanoBeacon Config Tool, which allows programming the IN100 without the need for complex coding. The tool offers a graphical user interface (GUI) for setting module parameters, such as advertising and pairing configurations.
Features
- IN100 NanoBeacon module with Bluetooth 2.4 GHz support
- Beacon modes: compatible with BT, Google™ Eddystone™, and Apple® iBeacon®
- Through-hole mounting connectors:
- UART 3.3V
- 4 GPIO
- 2 switch pins
- Built-in CR1225 (3V) battery holder
- Vertical Qwiic connector
- Operating voltage: 1.1 to 3.6 V
- Power consumption: less than 650 nA in sleep mode
1184113
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 5V Arduino boards. It can also be used for general serial applications. DEV-09716
zł92.15
24h
Available quantity: 2
Available
Kinetic lithium battery CR1225, 5020LC, ECR1225 1 pc.
zł1.89
24h
Available quantity: 26
Available
Development board with ESP32 chip with WiFi and Bluetooth communication. Equipped with a microSD card slot, USB Type-C connector for programming and Ardunio Uno Rev3 compatible connectors and Qwiic connector. SparkFun WRL-19177
zł238.19
Delivery date unknown
No product available!
Compact, low-power 2.4 GHz Bluetooth Beacon solution, ideal for sensor monitoring, asset tracking, and real-time location. With extremely low power consumption, it can operate for years on a 3V button cell battery, making it an efficient choice for IoT applications. Configuration of the module is simple and intuitive thanks to the InPlay NanoBeacon Config Tool, which enables easy programming without the need to write code, providing a user-friendly graphical interface to set the device parameters. SparkFun WRL-21293
zł31.62
24h
Available quantity: 2
Available
Other products in the same category (16)
Wireless connectivity module based on the CYW43439, providing Wi-Fi and Bluetooth for projects with RP2040 or RP2350 microcontrollers. Equipped with an SP/CE (JST-SH 8-pin) connector, it allows for quick, solderless connection, and optional pads allow for permanent wired connections. It is fully compatible with Pico W and ideal for IoT, automation, and mobile applications. Pimoroni PIM730
zł72.23
4 weeks
No product available!
The Microchip RN4020 module is an energy-saving Bluetooth v4.1 module with a built-in antenna; transmit power level + 7dBm, AES128 coding
zł99.61
24h
Available quantity: 2
Available
Expansion board with BlueNRG-M0 module compatible with Bluetooth v4.2. It is compatible with the ST morpho connector system (unmounted) and Arduino UNO R3. Communication with the module is via the SPI interface. STMicroelectronics X-NUCLEO-IDB05A2
zł81.67
1 weeks
No product available!
The module is compatible with the Grove Base Shield and designed to implement a wireless serial connection. It uses BluetoothV2.0+EDR and UART communication. Seeed Studio 113020008
zł110.24
24h
Available quantity: 3
Available
Available
BLE Beacon, which emits Bluetooth Low Energy signals, enabling discovery by Bluetooth devices such as smartphones or ESP32 without the need for pairing. With a built-in I2C interface and an 11-bit ADC, it allows data collection from various sensors, and its low power consumption (650nA in sleep mode) ensures long-lasting operation on a single battery, ideal for applications requiring mobility and long range. DFRobot TEL0168
zł79.90
4 weeks
No product available!
The evaluation kit designed for the nRF51822 Bluetooth 4.0 system consists of the BLE400 base board and the Core51822 wireless module with the nRF51822 chip. Waveshare NRF51822 Eval Kit
zł86.42
4 weeks
No product available!
Available
Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25467
zł20.49
24h
Available quantity: 2
Available
Bluetooth 5.0 module based on the BT401 chip. It allows you to send audio and support microSD cards up to 128 GB. DFRobot DFR0781
zł17.74
24h
Available quantity: 7
Available
A compact development board that uses the ESP32-PICO-MINI chip. It provides wireless communication via Bluetooth and serves as an easy-to-configure UART converter. It has a built-in PCB antenna. SparkFun WRL-24113
zł89.77
24h
Available quantity: 1
Available
Intel\'s AX210 wireless communication module. It supports 802.11AX Wi-Fi Generation 6E and Bluetooth 5.2, and comes with an M.2 A/E Key connector. Waveshare Wireless-AX210
zł122.05
24h
Available quantity: 2
Available
The BLE 4.0 Bluetooth module with CC2540 allows for transmission in both Slave and Master modes. It has an integrated PCB antenna and an extensive security system. modCC2540
zł24.40
24h
Available quantity: 4
Available
BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł62.12
24h
Available quantity: 1
Available
AW-CB375NF wireless communication module. It supports 802.11 a/b/g/n/ac Generation 5 Wi-Fi and Bluetooth 5.0 and features an M.2 A/E Key connector. Waveshare Wireless-AW-CB375NF
zł57.32
24h
Available quantity: 3
Available
Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25466
zł26.41
24h
Available quantity: 3
Available
Compact, low-power 2.4 GHz Bluetooth Beacon solution, ideal for sensor monitoring, asset tracking and real-time location. With extremely low power consumption, it can operate for years on a 3V button cell battery, making it an efficient choice for IoT applications. Module configuration is simple and intuitive thanks to the InPlay NanoBeacon Config Tool, which enables easy programming without the need to write code, offering a user-friendly graphical interface to set device parameters. Version with connectors and without LED and button, intended for direct use in the target application. SparkFun WRL-21327