

zł157.43 tax excl.
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. It is equipped with a USB interface. SparkFun DEV-15025
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. The module is equipped with a USB interface that supports any class of USB devices, including CDC communication devices, MSC mass storage, HID user interface and audio. The nRF52840 has an integrated 2.4GHz radio most commonly used as a Bluetooth Low-Energy (BLE) interface, but can also be used with Bluetooth 5, ANT or as a proprietary interface from Nordic. One of the features of nRF52840 is also its extensive pin multiplexing capabilities, so that almost any pin can support any peripheral. The module can be powered by USB or LiPo battery. The system has a bootloader, but it can also be programmed via a standard SWD connector and an external programmer.
The kit is programmed using the dedicated nRF5 SDK environment and Arduino IDE. The manufacturer also provides a user manual and documentation.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
nRF52 DK is a development board based on the nRF52832 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, a connector for connecting an external antenna for NFC, buttons and diodes available to the user
Board with nRF52840 microcontroller with Cortex M4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 and IMU LSM9DS1 module. Module with headers. Arduino ABX00034
Board with nRF52840 microcontroller with CortexM4F core (64 MHz, 1 MB Flash, 256 kB RAM). Equipped with BT 5.0 module and sensors - 9-axis IMU module, temperature, pressure, humidity, light, color, gestures and microphone. Arduino ABX00031
No product available!
Module with SIM868 designed for GSM, GPRS communication and GNSS positioning. It can communicate within the Bluetooth 3.0 standard. SB Components 21895
Low Energy Bluetooth adapter module with 2x4 pin 2.54mm connector, extra / high. RS232 allows communication with BLE devices
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
DFRobot BLE4.1 Module is a Bluetooth 4.1 module with DA14681 processor with 3.3 V power supply. It is characterized by low energy consumption and advanced energy management system (built-in charging module). DFRobot TEL0120
Bluetooth 5.0 module based on the BT401 chip. It allows you to send audio and support microSD cards up to 128 GB. DFRobot DFR0781
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25467
Bluetooth 4.0 BLE module with UART serial interface. Controlled by AT commands, it can be supplied with the voltage from 3.6 V to 6 V. AT-09/HM-10
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
No product available!
BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
Energy-saving Wi-Fi and Bluetooth 5.0 module compliant with the IEEE 802.11 a/b/g/n/ac standard. Ampak AP6256
An advanced wireless communication module based on the Bluetooth 5.2 (Bluetooth® Low Energy, BLE) stack, which is designed using the powerful Nordic nRF5340 SoC. It provides GPIO, SPI, UART, TWI, I2C, PDM, PWM, ADC, NFC and USB interfaces for connecting peripherals and sensors. SparkFun WRL-25465
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. It is equipped with a USB interface. SparkFun DEV-15025