WRL-12991 Bluetooth 4.0 Module - BR-LE 4.0-S3A
Description:
The BR-LE4.0-S3A is a standalone Class 1 Bluetooth 4.0 module that requires no firmware or external components. Custom client applications can be written directly onto the module, which supports both analog and digital peripherals, eliminating the need for a second microprocessor. Alternately, the BR-LE4.0-S3A can be integrated into an existing design as a HCI network processor device, with a host processor running the core application and the BR-LE4.0-S3A providing Bluetooth low energy communications.
The BR-LE 4.0-S3A module is equipped with an integrated antenna and is able to run Bluetooth protocols and profiles at low energy and power consumption (2V - 3.6V and 31mA). Each BR-LE 4.0-S3A utilizes the TI CC2541 SoC with 256K Flash (8K RAM), a maximum communicating range of 100m line of site distance, a maximum data rate of 3Mbps, and a frequency band of 2.402GHz to 2.48GHz.
Note: We received these Bluetooth 4.0 modules for a wireless board we ultimately decided to scrap. Therefore, we wanted to at least give you, the customer, the opportunity to use this BR-LE 4.0-S3A in whatever application you’d prefer! Once this module is sold out we will not be ordering it again, get it while you can!
Features:
Documents:
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Waveshare BLE4.0 Bluetooth 2.4G Mother Board, provides I/O expansion connectors and various interfaces. BLE400
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
HC-08 is a module operating in the Bluetooth Low Energy 4.0 standard. The system has a built-in antenna and small dimensions, and thanks to edge joints it can be surface soldered. The module is configured via AT commands
Comprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
The ESP32 WiFi and Bluetooth module has a dual-core 32-bit MCU that integrates WiFi HT40 and Bluetooth / BLE 4.2 technology. Designed for mobile devices and Internet of Things (IoT) applications. DFRobot TEL0111
Bluetooth module with built-in CC2541 chip. The module is small, energy-saving and easy to use
The low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. The board integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. DFR0478
DFRobot BLE4.1 Module is a Bluetooth 4.1 module with DA14681 processor with 3.3 V power supply. It is characterized by low energy consumption and advanced energy management system (built-in charging module). DFRobot TEL0120
2.4 GHz Bluetooth 4.0 communication module, based on the nRF51822 system. Designed for applications with low energy consumption.
The evaluation kit designed for the nRF51822 Bluetooth 4.0 system consists of the BLE400 base board and the Core51822 wireless module with the nRF51822 chip. Waveshare NRF51822 Eval Kit
No product available!
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359
Bluetooth 4.0 BLE module powered with 3.3V voltage based on SOC TI CC2541 (On Chip). The module has a range of up to 10m and communicates via the UART interface.
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
No product available!
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. It is equipped with a USB interface. SparkFun DEV-15025
No product available!
WRL-12991