modCC2540 - Bluetooth BLE 4.0 module with integrated PCB antenna
ID: 557650
5906623454747
zł24.40
Tax included
zł19.84 tax excl.
The BLE 4.0 Bluetooth module with CC2540 allows for transmission in both Slave and Master modes. It has an integrated PCB antenna and an extensive security system. modCC2540
Description
modCC2540 with CC2540 is a complete Bluetooth 4.0 BLE module, placed on a 15 x 11 mm board.
Features
- Compatible with Bluetooth 4.0
- It has a CC2540 chip with Flash memory (256k) and 8k RAM
- It supports both slave and master mode
- Integrated Bluetooth BLE stack, containing ATT, GATT, SMP, L2CAP, GAP
- It can be controlled via AT commands (via UART) or programmed by the application in the module
- Available RSSI indicator
- It has a 10-bit ADC converter
- Serial interface (UART / SPI)
- It has the function of waking up at break
- It has an AES coprocessor
- Power consumption depending on the mode (measured practically at an ambient temperature of 25 ° C at 3V):
- Power Mode 3: 0.4uA
- Power Mode 2: 0.9uA
- Power Mode 1: 235uA
- Operating frequency: 2402 - 2483.5 MHz (step: 20 kHz)
- Bit rate: 1 Mbps,
- GFSK modulation
- Number of channels: 40
- Transmitting power: -23 to 4 dBm
- Receiver sensitivity (with PCB antenna): -93dBm / -87dBm
- Power supply: 2.0-3.6 V
- Critical voltage on any port: VDD + 3 V
- Working temperature: -20 ~ 60 ° C
- Storage temperature: -40 ~ 85 ° C
- Dimensions: 15 x 11 mm
Block diagram of CC2540
To download
557650
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Available
Waveshare BLE4.0 Bluetooth 2.4G Mother Board, provides I/O expansion connectors and various interfaces. BLE400
zł36.90
24h
Available quantity: 5
Available
Other products in the same category (16)
Overlay module for Raspberry Pi with GSM, GPRS, GNSS and Bluetooth
zł124.62
24h
Available quantity: 7
Available
The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359
zł167.51
24h
Available quantity: 1
Available
Bluetooth 4.0 BLE module powered with 3.3V voltage based on SOC TI CC2541 (On Chip). The module has a range of up to 10m and communicates via the UART interface.
zł19.31
24h
Available quantity: 8
Available
Available
The IoT module combining Wi-Fi and Bluetooth (BLE) technologies, which is designed for a wide range of applications, from low-power sensor networks to the most demanding tasks such as voice coding, music streaming and MP3 decoding. Espressif ESP32-WROOM-32D 128MBit
zł32.90
1 weeks
No product available!
Bluetooth 5 module with nRF52840 chip. It is based on the ARM Cortex-M4 core with 1 MB Flash memory and 256 KB RAM memory. It is equipped with a USB interface. SparkFun DEV-15025
zł193.81
3 weeks
No product available!
Available
Bluetooth Low Energy module based on the nRF52832 microcontroller. It offers GPIO, SPI, UART, I2C, I2S, PWM, ADC and NFC interfaces for connecting peripherals and sensors. The module is characterized by a compact size. Adafruit 4077
zł52.47
24h
Available quantity: 3
Available
Integrated circuit, combining Wi-Fi functionality and Bluetooth 4.2 BLE. Integrated 32-bit dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be supplied with 2.2V-3.6V. The system has a QFN48 (5x5mm) housing. ESP32-D0WD
Regular pricezł13.60zł9.58
24h
Available quantity: 93
Available
Bluetooth 4.0 dongle as a USB adapter. Works with bluetooth devices such as speakers, headsets, smartphones, tablets, keyboards, mice, printers, projectors etc.
zł16.78
24h
Available quantity: 7
Available
BLE module based on Cortex-M4F core with integrated 2.4GHz antenna. It has been equipped with numerous peripheral systems, including UART, I2C, SPI, I2S interfaces and ADC inputs. Has support in the Arduino IDE. SparkFun WRL-15484
zł54.91
24h
Available quantity: 2
Available
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
zł107.21
24h
Available quantity: 13
Available
Expansion board with BlueNRG-M0 module compatible with Bluetooth v4.2. It is compatible with the ST morpho connector system (unmounted) and Arduino UNO R3. Communication with the module is via the SPI interface. STMicroelectronics X-NUCLEO-IDB05A2
zł81.67
1 weeks
No product available!
Bluetooth 4.0 module based on the CSR8635 chip designed for Bluetooth audio applications. The module has a built-in antenna and pins for edge connectors.
zł39.09
24h
Available quantity: 1
Available
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
zł153.80
24h
Available quantity: 1
Available
Bluetooth 5.0 module based on the BT401 chip. It allows you to send audio and support microSD cards up to 128 GB. DFRobot DFR0781
zł17.74
24h
Available quantity: 7
Available
The BLE 4.0 Bluetooth module with CC2540 allows for transmission in both Slave and Master modes. It has an integrated PCB antenna and an extensive security system. modCC2540