

zł132.44 tax excl.
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U
WiFi/BLE module in the form of a small board with a convenient connector with a 2.54 mm pitch to facilitate prototyping. It supports support for both the 2.4 GHz and 5 GHz bands according to 802.11abgn standards, and thanks to Bluetooth Low Energy (BLE 4.2) technology, it offers not only wide communication capacity, but also low energy consumption, which increases the efficiency of your projects. The WPA/WPA2 encryption used guarantees communication security, and the u.FL connector dedicated to connecting an external antenna and the operating temperature range from -40 to 85°C make the module ready for various environmental conditions.
Thanks to the device's Flash memory storing configurations and the ability to update the software from the Tibbo BASIC/C application or over the air (OTA), you gain flexibility in managing and maintaining the module. Easy configuration is the key to success, which is why WiFi/BLE module works with the L.U.I.S. application. available for iOS and Android. This intuitive application allows you to conveniently configure host devices using HTML5 via the BLE interface. A status LED indicating the connection and a connector with a standard 2.54 mm pitch are elements that facilitate monitoring and integration of the module in your projects.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare ORD-CM4-ANTENNA
Certified WiFi antenna compatible with Raspberry Pi Compute Module 4. Supports 2.4G and 5G frequency bands. Waveshare Compute Module 4 Antenna Kit
No product available!
A 2.4GHz antenna dedicated to the XIAO ESP32C3. With a robust and effective design, the antenna enhances the wireless capabilities of the board. Seeed Studio 103990623
An integrated module combining WiFi, Bluetooth 4.0 and FM radio. It has derived SDIO, UART and PCM interfaces. Ampak AP6335
Advanced wireless communication module, based on the Bluetooth 5.4 stack (Bluetooth® Low Energy, BLE), which was designed using the efficient Nordic NRF52805 SOC system. The module offers support for the UART interface, available only in peripheral mode, which allows for effective operation as a data bridge (Data Bridge). Sparkfun WRL-25466
An efficient Bluetooth 4.0 module that ensures excellent operating parameters and significantly increases the efficiency of wireless communication. It is based on the popular Nordic BLE 4.0 nRF51822 microcontroller, which guarantees both performance and low power consumption. It has a built-in Bluetooth stack and is controlled via the UART interface using AT commands. WT51822-S4AT
An advanced wireless communication module based on the Bluetooth 5.2 (Bluetooth® Low Energy, BLE) stack, which is designed using the powerful Nordic nRF5340 SoC. It provides GPIO, SPI, UART, TWI, I2C, PDM, PWM, ADC, NFC and USB interfaces for connecting peripherals and sensors. SparkFun WRL-25465
Board with the Artemis chip, the GNSS ZOE-M8Q module and the Iridium 9603N satellite receiver. It allows you to send and receive short messages with data anywhere in the world. SparkFun WRL-18712
No product available!
Bluetooth 4.0 module based on the CSR8635 chip designed for Bluetooth audio applications. The module has a built-in antenna and pins for edge connectors.
A module that combines GSM/GPRS/GNSS and BT 3.0 technologies. It is available in a small, easy to solder LCC housing and has a low power consumption up to 1.2 mA. Quectel MC60CA
The Pmod BLE module is a Bluetooth module with powerful capabilities. Thanks to communication via the UART port, the module can be connected to any platform equipped with this interface. The module is equipped with the Roving Networks RN4870 system, in which a full Bluetooth interface is built-in. Digilent 410-359
The BLE Nano from RedBearLab is the smallest Bluetooth 4.1 Low Energy (BLE) development board on the market. With the included MK20 USB in this kit, you’ll be able to deploy firmware to BLE Nano even easier. WRL-14071/WRL-13730
Bluetooth 5.2 and IEEE 802.15.4 communication kit. It uses the STM32WB55RG microcontroller (1 MB Flash, 256 KB SRAM, ARM® Cortex®-M4 and Cortex®-M0 +). STMicroelectronics NUCLEO-WB55RG
No product available!
The Vtec by BLOW Bluetooth 4.0 OBD2 diagnostic interface is an advanced tool for monitoring vehicle parameters and diagnosing faults. It allows reading and deleting errors, analyzing performance and controlling engine operation in real time. Thanks to its compatibility with Android, iOS, Windows and MacOS systems and support for popular diagnostic applications, it is a convenient solution for every driver who cares about the technical condition of their vehicle. Vtec iTRON by BLOW
Compact, low-power 2.4 GHz Bluetooth Beacon solution, ideal for sensor monitoring, asset tracking, and real-time location. With extremely low power consumption, it can operate for years on a 3V button cell battery, making it an efficient choice for IoT applications. Configuration of the module is simple and intuitive thanks to the InPlay NanoBeacon Config Tool, which enables easy programming without the need to write code, providing a user-friendly graphical interface to set the device parameters. SparkFun WRL-21293
Diagnostic interface for wireless diagnostics of cars with OBD2 system. The device uses the popular 16-pin connector and is equipped with a Bluetooth 3.0 module. Vgate iCar2 BT3.0 Orange
Bluetooth 4.0 dongle as a USB adapter. Works with bluetooth devices such as speakers, headsets, smartphones, tablets, keyboards, mice, printers, projectors etc.
Evaluation kit with Bluetooth 5.0 Sparkfun Artemis module. Equipped with a microphone, kmaers and accelerometer. SparkFun DEV-16828
The BLE 4.0 Bluetooth module with the CC2541 system has an integrated PCB antenna and an extensive AES security system. Thanks to the built-in system CC2541 from Texas Instruments, it is possible to create a project without the use of an additional microcontroller. modCC2541
WiFi/BLE module that supports both the 2.4 GHz and 5 GHz WiFi bands, as well as Bluetooth Low Energy (BLE 4.2) communication. It has a u.FL connector dedicated to connecting an external antenna and a connector with a 2.54 mm pitch, which greatly facilitates prototyping. Tibbo WA2000U